Search results

You will be fine with Graphtec but the FC is worth the additional cash IF you can figure it in your budget. Graphtec's plug-in should work but I don't use it so I can't be any help there. Good luck. Ask a lot of questions and don't worry about a few flames here or there!

DUDE!!!???? Are you bashing me or is that just some Canadian humor? LOL

Welcome...BUT, I don't see the bashing that so many are referencing constantly. If you ask an honest question with some thought you will receive an honest answer with some thought. You are a bright guy so you will be just fine unless you start bashing the bashers. If everyone would just let...

HEY! Stop file swapping! hehehehe

I'm dangerous when it comes to digital printing and there are those who know waaaaayyyyyyy more than I do. :frustrated: However, I have owned and operated a versacamm SP300V for the last two years and will share what little I do know. Good luck on your business venture!

I've owned both and it's not a bad machine for what it is. HOWEVER, there is no future for the pc-60 or pc-600. It is extremely limited for today's market. It is an ok machine for printing white, metalic or static clings, but very expensive to run. I'd buy a working unit for $500 but I wouldn't...

Agreed! I found an air pocket and purged the lines and bulk cartridges. Everything is working well...thanks to those who responded and I will keep in mind those who offered to sell heads for when that day arrives.

IMO - You don't really NEED to get into service mode, go into manual clean by holding down the power and clean button at the same time until the printer powers up - follow prompts to move head carriage. If the head soak doesn't work then there may be no quick fix...I'm pretty sure it should work...

Pinch off the drain lines that go from the pump to overflow bottle or capping station to pump. Fill the capping stations with cleaning fluid and park the heads down and let soak. You can try this without pinching the lines but then you aren't getting a real effective soak - it would work if the...

You are actually quite articulate Pro. Sorry I wasted band width by asking the original question...:banghead:

The issue is that no one knows what your "no" means...not that it needs deleted or bent. Explain your "no" if you are able. :Welcome:

bump for the morning! ;-)

Where is the best place to get a new head for a Versacamm SP? I had the black/cyan head replaced a while back and should have had both done while the tech was out from Chicago. I've been gone on vacation for two weeks and my magenta head nozzles won't fire and I can't get them cleaned out. I'm...

Welcome to THE BIZ!

Isign, You are correct in regards to the paint and the surface texture. Printed floral bands and die cut lettering is completely different so you are wrong in suggesting that 651 will not work. When questions like this are answered there is usually too much information missing to connect ALL...

Oracal 631 will work just fine. If you are really concerned use 651 but don't plan on reusing the drywall later after removal without some patch work. ;-)

so...who's gonna start hazing the newbie this time??? Good luck Vid!!!

AW MAN! I finally knew a font to help someone BUT wasn't here in time. I'll never forget this font - I've weeded it too many times. Women love this one! ;-)

I've used photographs of headlights before - very realistic

You CAN use both sides but the matte side was the intended cutting side.