Search results

Something else, The lines missing in the second part of the magenta, and the few missing in the other colors will make it VERY DIFFICULT for you to print colors that will look their best. The Mimaki you have is a VERY high quality unit. It has capability of really fantastic work. You are SOOOO...

Keep cleaning it should come back:thumb:

caution: Please re-read above post important changes made in green

OK; BEFORE STARTING make sure the docking staion is in good condition, and the lines leading to the ink waste bottle are clear and open. Since you indicated that you had used your syringe to push cleaning fluid through the top of the print head I am assuming you have the print head cover...

If everything is tight from the dampers back to the ink carts, let's move to setting up getting ink to flow through the print head.

Are you fairly certain that there are NO air leakes from the dampers back to the ink carts?

Are ALL the dampers at least 3/4 Full?

OK: If you know how to remove the dampers {be CAREFUL they are delicate} start by opening the valves back behind the ink carts. I would do this using the main control panel. Then carefully remove ONE DAMPER at a time. MAKE SURE YOU COVER ALL THE AREA on top of the Print head, as well as...

I use these to pinch off the ink lines during ink draw downs while trying to clear a print head clog. They can also be used to pinch off the ink lines above the dampers when changing out dampers. This helps to prevent ink drips and loss of vacuum when drawing ink through the docking station. It...

Forceps Here is something that will be invaluable in doing the head cleaning and ink drawing as well as changing out dampers {note spelling on DAMPERS, NOT dumpers} http://www.usplastic.com/catalog/item.aspx?sku=84051&gclid=CMvpt6ztjLsCFcY7Mgod02YAdw You "should" be able to purchase these or...

For someone looking for a smoking deal on a new PC you might be interested in this: http://www.qvc.com/Dell.product.E224940.html

I read through that thread several days ago, which is why I wrote the last reply to you. By looking at problems such as yours in a specific chronological manner it helps everyone to follow along. It also generally lets others who may experience similar issues to see how to work through a...

player: " How Much?" Remember THIS??? Originally Posted by Vinylman IF you can't use the search feature here on signs 101, you probably won't be able to follow the detailed instructions for correctly restoring a...

h6bs; How did you get in this situation? What was your first indication there was an issue with the Mimaki? Could you give us a CLEAR detailed report as to what you have done up to this point? STEP BY STEP Many times you will find help here , BUT, you must stay on track with each issue...

I have been fascinated with this technology, and you might find it right for your application. I do not know how much the machines cost, but it would put you in a wonderful position if it will fulfill your current niche'. And would allow you to become a wholesaler to other shops for the short...

b6hs, Is there any possibility you can take a GOOD photo of what your printer can produce right now? photos are very helpful to those who are trying to help you with your problem.

Because the valves seem to be opened and closed by electric solenoids I am not personally familiar with any other way of opening these valves. I will check through my service manual to see if there is a way. From what I can get from the service manual, the only thing you should do behind the ink...

Here is a copy of my answer to this problem from a former thread. It should help you solve your problem. You should follow the link and get a copy of the SERVICE MANUAL. Hope this helps!! http://microasu.com/download/mimaki/ICCprofiles/JV33/JV33%20Maintenance%20Manual%20D500346_Ver.1.10.pdf...

The basic way to get the valves open is as follows: Restart your machine while holding down the FUNCTION & REMOTE buttons and start the machine by pushing the green button on the lower front panel. Once machine starts initialization process, release the two buttons and let the machine start...

You might want to PM one of our resident experts. "artbot" is on the top of my list. He has done tons of research in the areas you seem to be referring to.