Search results

Jim from CammTech which is an authorized Roland service center gives a lot of good advice on the Roland ColorCamm forum. I have noticed this issue being discussed there recently, I believe the printheads are available and that Cammtech is willing to send them out with installation instructions...

Isign, mine gets webed the same as threeputt's, keep in mind we are using reverse wound lam so I would imagine that with forward wound lam the lam roll would be flipped and feed off the bottom of the roll.

cinemasign, yup tried that too, comes in the same way no matter what I try, have just decided to manipulate the artwork in Illustrator, man this is gonna be fun, gotta convert all the strokes to outlines and a bunch of other stuff that I'm just not familiar with in Illustrator, it'l take me some...

I wanted to bring it into Flexi to apply traps/bleeds and the contour cuts, I am much more efficent in Inspire & Flexi than I am with Illustrator (especially when it comes to path editing), I guess I'm gonna have to do this one in Illustrator and at least this way I'll be getting more familiar...

I've got a customer supplied file in .AI & .EPS format which was created in Illustrator CS2. When I attempt to open or import it into Flexi 8 the gradient fills do not show up. The greadient fills are created using a pantone color and then 40% of the same color at the lighter end, Is this...

Quite a few logos such as Snap-on have been removed from brandsoftheworld

Welcome Jesse, from Sac

Oh cmon guys, you gotta stop posting all these cool deals...LOL Well, do I really need another 11 volumes, probably not...but that ain't gonna stop me, now is it? Hey Chris, you gettin a cut from DigitalJiuce?...jus kiddin, although I bet you inspired quite a surge in their sales after posting...

Are you leaving the required distance of material after the crop marks? I believe it's 3 9/16" or 90mm for the back and 3 3/16" or 80mm for the front. Refer to page 81 in your Versacamm manual. I just did some today that I forgot to leave long enough, just taped another piece of vinyl to the...

Call your distributor or SAI and they will send it to you.

Woops, I answered the wrong post, check your other post.

They are on the "Fonts & Graphics" CD. If you purchased an upgrade they might not have been included, I recently purchased the upgrade to ver 8 along with a second site license and recieved no font CD in either package.

You're last poll option threw me a bit, what's "plain material"? For cut vinyl banners I buy roll stock 14 oz. Banner Max from Fellers in 36" - White, Yellow, Blue & Black 48" - White, Yellow, Blue & Black 60" - White, Yellow, Flour. Orange, Red, Blue & Black For digital printing I buy 13...

That would possibly explain why it just disappeared. I am much faster designing with Inspire than stumbling through Flexi and would like to get Inspire onto an XP system but I've heard that it dosen't work correctly on XP. I actually have Inspire & Flexi running on a Windows 98 system both...

I have had the machine for about 6 months and have mainly used it with the 210 lam without any problems but most of the time those prints are smaller, nothing usually over 5-6 ft. long. I only encounter the wrinkling when attempting to use the 290 cast lam and those are generally longer prints...

Oh man I'm hoping someone can lend some support on my current issue with my laminator, on one job in the last couple of days I have trashed nearly a full roll of Oracal 3951 along with a roll of the 290 lam film. First off I never experience this problem using 3651 w/210 lam, always goes...

I Went from Casmate to Inspire to Flexi, although I run Flexi on several systems I still do most of my basic layouts in Inspire, after using Inspire for quite some time I got very efficent with it, especially with path editing. Being a one man shop dosent leave a lot of time to master new...

Actually there is a more thorough set of directions on head cleaning for the Versacamm on printingdigital.net ,check it out, print it out and do it frequently for smooth operation. http://www.printingdigital.net/

I'm assuming that you are refering to the blade holders, each is designed to accomodate different blades, refer to your Graphtec manual for proper applications.

Does anyone recognize this as a font? Yah I know, it's ugly but I need to identify it if possible.