Search results

:Welcome: . . . You will most certainly learn a lot here at :signs101:

I've been considering a Mutoh value-jet because of the wave print technology which supposedly fixes any and all banding issues, however I've made no decisions and will likely do a lot more research, as this purchase will not be until next year at the earliest . . .

Try saving the PSD file as an EPS then open the EPS in Illu !

Thanks, Threeputt . . . Great Info . . . And truly appreciated !

Thanks Hal, We buy from performance quite a bit . . . I didn't know they had service techs on board . . . Thanks again, Still interested in hearing from threeputt !

Threeputt - I just spent about an hour yesterday cleaning my Camm-Jet ! I had never cleaned it, and come to find out the previous owner that we bought the shop from never cleaned it either. It was a huge mess, but after cleaning everything thoroughly and sealing it all back up, I did about...

I think any form of work in this industry that is specific to a specialty should have it's own forum . . . Thus making topic navigation easier !

MBarden - I swear by that picture I was looking at the opening credits for an M. Night Shyamalan movie . . . I couldn't make out one bit of that dark and dreary picture . . . Try again !

:Welcome: 2 the Jungle !

Check to see if the cutting strip is damaged . . . as this could interfere with the blade !

:Welcome: 2 the dark side - and may the force be with you . . . here at :signs101:

Mike - I feel like a huge idiot, but it may be as simple as when I went into the PM and into add setup - I didn't check the color printers option at the bottom of the dialog box, but rather left it on vinyl cutters, so of course it wasn't finding my EDGE drivers to load them . . . UGH ! -...

Mike, Thanks for the reply . . . I'm running 7.6v2 and as I stated earlier the GS15PLUS shows up in the production manager, but the EDGE printer does not ! This is a legal version of FlexiSIGN Pro with a dongle and I print to my Roland on a regular basis with this program. Note : I am able...

Thanks Fred, Is there some information available somewhere on how to configure Flexi for EDGE - PRINT/CUT setup ? ? ? and if it's through regular printer setup dialog, how would you create the reg marks for cutting ? ? ? I can see the GS15Plus in the Production Manager, but the EDGE printer...

I Posted this at 4ET but like every other forum I've been to - It was a GHOST TOWN over there ! Here goes . . . Among the printers I use I have a Gerber Edge with a GS15Plus Plotter. I have used both Omega and SignLab for the PRINT/CUT . . . Forever. :help: Is it possible to do both the...

I haven't changed the blade in over 18 months . . . No Problems !

OH' SHEET - Cut Everything ! ! !

What does your Omega See ? Anything with -300 attached to the end of it ? Try one of those first ! Then Download additional drivers . . .

If my memory of a previous thread is correct, a Roland CM-300 [or] CX-300 should work for the XY-300 . . . Good Luck !

:Welcome: to the darkest depths of HELL ! Just kidding of course . . . Have FUN and LEARN a ton here at :signs101: