Search results

We had head crashes caused by bad design of the roller that holds the gantry cable opposite side of the motor.. on the uv curing unit. Check that. Allso clean the head of the moror there might be some rubber inside.

Tried that, does not work, it is too smart.

Print side is white, back is matte black..

Hi, we have the 1640 model, and it can not print media with black back - we print a lot of decolit 251bw but can not do it on the colorado. Someone know if oce solved this problem on the 1650/1630? Same problem with transparent media without liner..

As far i remember you get this screen at instalation.. just select the one you have. Then afterwards you will find all the tools in material manager. In this screen is normal there is just the selection of the type of the router..

hi, just found out that all profiles that are made for the 356B type ink - have a greenish black. If you are in europe you probably have 356A type ink.. So be careful to use only profiles that are made for this type of ink. The difference is huge..

There is allready a leak video, 700w and 800w, just saw it.,

Change the hub, it might help in your case.. you can use any hub to try, is a 10$ thing, might help if your usb problem is in that place...

Same here, there is no solution. Hapens once a day here. I suspect a bad contact, specialy in the carriage/head unit, hapens mostly on the start of fast movement.. we allso had some problems with the stop buttons, the cables were not enoug tightened to the pcb board. After tightening the screws...

HI on my machine: 20.000 m2 126L ink. =6,3ml/m2 we print 90% in high quality mode, 5% speciality, 5% production. Mostly full coverage.

There are some really good ones. I bougt one for dirty work, but it was so good it became our main laminator. Fully pneumatic, in 5 years no maintenance at all. It is from mefu china. Model c3. But they have a distributor here in europe, if i would need some parts...

Why does it have to be uv? For the little time You could get 2 latex or 2 epson 60600..

i agree for some jobs. But mostly if a customer wants labels on roll, is ment for labeling, means labeling machine and there you have to have the labels in one piece, because the spacings etc must be correct over the whole roll. There are many digital roll printers for small to medium runs, like...

Durst p5 would fit, but high price..

Are you sure they use a roland for that? I dont think so.. there are different printers and methods to print roll-labels.

What do you mean? There is a manual forward and backwards in the output menu.. What firmware version do you have?

We jave good results with avery wall films, specialy the canvas structure, looks and works great

Drupa is this year. HP allways brings something new at drupa every 4 years - so this year should not be different. Allso epson lately is mayor "pita" for hp, so they have to bring something new if they want to keep the market share.. just my opinnion.

There are many label printers capable of that.. zebra, cab, toshiba..