• I want to thank all the members that have upgraded your accounts. I truly appreciate your support of the site monetarily. Supporting the site keeps this site up and running as a lot of work daily goes on behind the scenes. Click to Support Signs101 ...

Search results

  1. Misinformation about PrismJET VJ48/Mutoh 1204

    The VJ-1204 can not print with a 1" margin arround a true 48" wide print. When printing 48" wide the printer only has about a .2" margin on the right hand side because of the way the left hand covers are, the print head simply doesn't have enough room on he left to slow down if the image is any...
  2. Graphtec CE5000-60+ FlexiPRO 7.0

    Flexi 7 doesn't have the drivers for the CE5000 series cutter, this cutter came out after version 7 was already discontinued, with that said you should be able to use a CE3000MK2 driver to run the CE5000 series. If Flexi 7 doesn't have the CE3000MK2 use the CE3000 series driver instead...
  3. FC7000 Cutting coarsely on one side

    This definitely sounds like an issue with the Teflon cutting strip, you said that you replaced it in one of the above posts; did you make sure to remove all previous adhesive and any other dirt or debris before putting the new one in? An easy test to see if it is the Teflon strip is to run your...
  4. Graphtec 5000 or 8000 whats the difference?

    The CE5000 series is Graphtec's Engineering Class vinyl cutter, the FC8000 series is the High Performance series. Both models are capable of contour cutting but I highly recommend the FC8000 series for this purpose. The FC8000 Series has the ability to adjust the sensitivity of the...
  5. VJ-1604 PhotoPrint SE 6.1v2

    This is a known problem in Flexi and Photo Print if you print with FMXPress Diffusion. Go to RIP and Print, click on the Advanced tab, if you have the latest version it will be an icon with three ink drops on it, and change the Dither Type to Error Diffusion or Error Diffusion 2. For best...
Top