Search results

We just used one for a job and got it from "Art Explosion" clip art collection.

For those of you who have changed locations either from home or an out of the way location to a store front on a busy street with good visiblility, how were your sales changed? Did your sales decrease or increase, and if so by how much? Did you change any other marketing efforts or just rely...

Cable at home and at the shop, just no TV at the shop:-)

Yes we droop the material to be printed, and the memory is not a problem. Got an answer from Roland today, they said it could be the servo board $500 or main board $1500 2 1/2 years old ouch! We had our computer tech on it also, and he thinks something is going wrong with our design...

Thanks Chris, didn't think of saving all that stuff, so have retrived from the trash most recent ones and will start a stack for them. Tried this morning pulling the network connection at a 99% printed, all that happened was printer stopped, no codes not stroke with cancelling, computer just...

Update, no replies so I am guessing this is a unique issue. So far the tech had us update the firmware, done, happened again. Then he had us print from Versa Works, next print ditto, again. Also suggested the cable between the Roland and the wall may be bad, so replaced that. Trying to get...

We have had prints cancelled for no apparent reason, reset and cancelled again at a different point in the print. Have called our tech but no ideas yet. Some were on high res large files, and the others were simple text and graphic prints. We have got two error messages 1300874 and more...

We used reflective vinyl on the top of the pinch roller, cured our problem at least on a temp basis. It appears that the sensor gets some of the ink overspray which reduces its ability to see the reflected light.

Great, let us know how it perfoms!

Welcome from the not so green part of the great NW.

And another good reason to have a charge for customer supplied files!

1500 sq feet in a strip mall on major street in this area. No roll up door so all vehicles are done outside. Three production tables, desks, benches, saws, material storage, display area. Laminators down the middle between production tables. Not more than a path around most of it. We are...

Called and gave the codes to the Roland Tech, he had not seen this problem before, nor did he know what the codes were. We then shut down the printer at the main power for about 30 minutes and did a complete clean. After we turned it back on ran some print tests and went back to printing...

Lots of good advice here. Look at what and how soon will equipment need to be replaced to remain competive. This can be a killer when you look at purchase/lease costs on the equiment. If it is old will it will need expensive maintenance. You have not said what you will bring to the party, if...

Tried that, after 3rd print, printed a small vinyl sign, got the ink warning so we changed the cartridge and figured maybe something was connected to the ink system. Just a few minutes after we changed out the cartridge same problem again, grrrrrrr. Shut down for the night, and will talk to...

Printing banners with the 540 and in the middle of the print, the machine goes to cancelling, no new directions from rip computer, just does it on its own. Lights flash busy and cancelling after 10 minutes I pushed the power button and got an internal error of 1300874 (first time) turned it...

Most of our in store sales is across a counter, however I like to greet and visit with new clients face to face without a counter between us. We also have a small desk and table in our showroom that we sit down with clients on large jobs. Clients that come in can see into the production area...

Wecome Theo, from Kennewick, WA

Nick, Welcome, become a CM and you will have access to an incredable amount of knowledge, and help, along with a lot of enterainment at times!

We are switching over to 14oz Zeelong (think that is what it is) trying to get some more life out of the banners account the wind is always blowing here. We also have had good success with the 10 oz Zorbex for indoor and very short term.