Search results

piezo electric heads and a magnetic sheet = banding prints. too much of a hassle to get it to finally run. then end up with crappy print. we had to tape foamcore strips over the metallic parts of the printer to get it to go through. pain. print on vinyl then mount.

We print reverse on clear and lam with white. We also contour cut them with no problem. All we do is place post it note squares over the registration marks as it is rolling in to the laminator. Then with an exacto we trim the post its out. We use ij10 and its thin so you can see the front...

Like others have said. Be honest. Itemize your quote so he can see the work. And if you just don't want to do it price it high. It all depends what your time is worth and can you use that same time to do something bigger. Would I spent all day on a $100 decal or check on my big accounts...

motor? just put a hamster wheel in the belly with a fat hamster and hang a fake snake around the chicks neck and let er go!

bitcoin is not a currency it is a commodity so the price reflects current market value. that being said if you do accept them dump them asap. seems like an unnecessary hassle.

world of signs... you in medley? call executive printers of florida. they in medley - 3058874333

Dude... RUN.

Maybe it is for a strip club or some other GLITZY flashy place. Who knows.

I would fix it with 1.5 strips. 5 panels? I would 2 horizontal panels. the seam would be in the horizontal channel that runs along the length of the van. makes life easier not having to line up a long phone number along the bottom of the van over 5 panels.

why are you having green problems. what rip are you using? colorburst updated their rip so it uses more of the green so as to mitigate those early green problems. most rips are cmyklclm only. when orange and green were added old profiles were not adequately pushing enough green ink through...

Ours came with it on but we turned it off. If it on we cant print a 60" banner on 63" and it the gutter ends up on the part that folds on to the backside hem. Back in the day when running hard solvents it was a good idea to have it especialy if you ran a long job with only one color. The...

** OP is in Shargi-La.

pre-pay for the roll? no way. just for sh!ts and giggles here's some math. Roll is $200 60x150' what are you going to charge him? 40% markup? 50% markup? 100% markup? $200.00 x 100% = $400.00 60x1800/144=750 sq ft. If you selling your prints at lets say $8.00 per sq ft thats...

it all depends on the printer you are using. the fabric backlits you see in the photos are done using DYE-SUBLIMATION process. Ink goes into the fabric and creates a denser print. eco-solvent is a thin layer of ink and usually ends up washed out. UV flatbed ink is a bit denser. it also...

Ultraflexx 15oz PET smooth blockout banner w/ anti curl @ Fellers.

Why hassle with it? trim around the caps.

http://www.displays2go.com/Search?q=letter+sign

Most likely it is the roll of banner you are using. Sometimes they come bad from manufacturer. We had one tenting in the middle and head striking. I went nuts jacking the heat up then down then load and re load adjust this adjust that. Then we tried another roll from same brand and it ran...

you need a license? :)