Search results

the 540's left head is black where the 545's is Cyan. If I remember correctly.

When you send the job, does the cutter control panel change at all? Unplug the cutter and send a job... see if you get an error on the software... If not, your port is not correct, the driver is not correct/installed, or possibly the cable is bad...??

What settings do you have in the CuttingMaster for the cutter? Operating System? Version of Cutting Master? Firmware version? Current CuttingMaster version is 2.182 Current Firmware version is 2.70 Both available for download, here

Is the bounding box the page border? Instead of using Flexi 8.1's PDF function, I would recommend downloading and using PrimoPDF or upgrade to Flexi 10.

Mirrored or Rotated? just to be sure.

Sent one to tattoo.dan and he installed it today. Have not had any issues to date with them. By all means if you want to call your Roland dealer, do so. Most dealers will just try to sell the head a a whole. A few carry the manifolds by themselves.

http://www.cibersupply.com/solvent-ink-and-replacement-parts/replacement-parts/print-heads-and-related-parts.html

Huge differences **** Upgrade to the Premium Membership here and you will gain access to this and many more helpful items.

PM me. Have not had this issue with our manifolds.

Did you measure the distance from the end of the original carriage cable to where the cuthead assembly was fixed? You might also have to change the carriage cable tension and do an Scan Aging for a 10 minutes to even out the pressure on the cable.

That is why I stated IF i had the right one, as well as not post a link to the thread. (should have kept my mouth shut) Thanks Gino :)

"we can manufacture that for you. for a very fair price. and in a reasonable time frame. let me kow if i can help." -- Posted 22 minutes after the OP (If I found the correct post the OP is referring to no one answering).

+1 While... Intention of helping 'other Merchant Members', one would think a MM subscription would have been intended as well. Maybe just taken out of context.

Normal. Either learn and do yourself (and take on the risks involved) or pay to have them done. Captops - change every 4 to 6 months (depending on use) Dampers - maybe once every 12 to 18 months Wipers - every 2 to 3 months wiper Scraper - yearly or as needed Blade - as needed Heads - as...

Have you checked continuity between the fuse leads? Power off and unplug first.

Is Connect via TCP/IP in the Preferences>Tools>RipPrint checked? Do you have to reset IP of the SEH?

This happen all if a sudden? Possible loose printhead cable. ??

Have you tried the Print/Cut Adjust to see if it is in aligment? What software? What version? Is this error repeatable with different files? Is the error consistent in regards to distance off?

Change the Damper maybe? You should manually pull ink with syringe from each of the Cyan dampers to see if you get flow.

Replace the dampers and possibly the captops. Sounds like starvation which usually means a bad damper. That significant of a drop off sounds like damper.