Search results

Flexi does not need driver. It Supports inline cutters and sends the commands directly to the port.

"B" He has flexi

Not your Plotter, but your computer can be wireless. Do not listen the negative ideas. TCP never fails, and plot files are small. The plotter needs to be connected to your router, and you can connect your laptop to the same router wirelessly. I can Run all my machines from my MacBook sitting...

I have look at the weekend, but I only remember 5, 6, and 7.5. I am sure have CasMate 6.5 and Inspire.

Quatro Slab Bold

It seems you still choosing the hard way for yourself. Flexi is the only software you need for Print, Cut and Design. Learn how to use it.

Graphtec Cutters have FREE CuttingMaster 4 Illustrator Plugin. Adds Flexi's Production manager to Illustrator or Corel (forget CM5). or some with Graphtec Pro Studio licence, what is FlexiSIGN itself.

It could, ribbon cables are sensitive staff

There are 2 slots for the blades. did you use or sent job to the right one?

I have looked it once, and will stay with CM4. Graphtec Studio is even bigger step back. Keep a safe copy of the good old downloads, before they disappear from they website.

Yes. this is how gerber sells the £1 cable for £160. The limitation is in omega for EDGE2. Edge1 works with most of the cables. Flexi can print with any cables as well to EDGE2. I have not tested the printserver with Omega 4 yet. I only have Omega 2.6 at home, And EDGE1 where I have Omega4.

Omega does not let you use Multi mode PCIe parallel cards. Needs to be native ECP port for EDGE2.

I have many, but Omega 2.6 cannot give me the network option for the EDGE2. They work with Flexi .

there are 2 parallel cables for edge2. the new one only supported after Omega4, the old one hard to find, but I think still supported. Omega 2.6. Installed the color profile files to wrong folder, but could move them to the right place in Windows10. I may had issues with the dongle driver. for...

Yes, USB-Serial is easy most of the cables are ok, USB-Printer needs a special cable for the EDGE2. I am running Omega 2.6 already on Windows10.

Use USB-Printer port or mini Network PrintServer. No driver needed. Flexi supports it.

It is a Legacy thing. I am not sure why Graphtec still apply it on they cutters. computers and USB ports are fast enough to use 0.010. but the standard for most of the cutters is 0.025.

Down in the Cut/Plot page, and in the Default Job Properties. "Step Size" is written there.

GPGL Step size needs to be set to the same on the software and on the cutter. Default is 0.1mm, but I have found that too large for small objects. Recommend 0.025mm.

Since v.10.5 Flexi works just fine on windows 10 64 bit computers, and on windows 11.