• I want to thank all the members that have upgraded your accounts. I truly appreciate your support of the site monetarily. Supporting the site keeps this site up and running as a lot of work daily goes on behind the scenes. Click to Support Signs101 ...

Search results

  1.

    White on transparant for small labels

    I have a Gerber EDGE2 and I like it a lot. It is quick and easy to use if you know how .

  3. Need Help Gx-24 Plotter USB not working.

  4. Summa S2 120 t series

    You are Lucky, You just Got one of the best cutter you can have, I can give you a S class 140D for it

  5. WTB: EFI Fiery Color Profiler Suite 2.2

    I think you can download it from Xerox.

  6. Need Help Gx-24 Plotter USB not working.

    It was OK. once after she did some changes vith the DIP switches. than wrong again. Could have some loose soldering on the serial Connection or on the mainboard. I'll see her on tuesday. In here: Serial connection with correct settings and cablig, just as stable as usb,and readback works too...

  7. Need Help Gx-24 Plotter USB not working.

    After the machine measured the material, You can read it back to the cutting software. This function is actually working with serial connection as well.
  8.

    AS setting?

    Acceleration Setting

  9. Need Help Looking for Service Manual Epson T7270

    There Are B, D and G. I am not sure the difference. Give me your email. The file is too large to share here. It could be dirty or dislocated encoder as well.

  10. Need Help Can someone convert flexi format back to eps format?

    What version? Send Me the file

  11. Pnc-960 stops cutting midway

    If the dip switches all off it should work now. Could fail if it is not a full handsake null modem cable, or broken seldering for the serial socket (I had that before when someone kicked the cable.). An other thing: USB-Serial adapters cannot work well with long cables Last thing to Try is...

  12. Pnc-960 stops cutting midway

    Your cutter is Fine. just marked the buttons you need to enable and make sure all dip switches are off position on your cutter.

  13. Pnc-960 stops cutting midway

  14. Pnc-960 stops cutting midway

    Can you see !, You have no flow control enabled. It tells the computer if the cutter is busy or ready to receive more data. without that the computer keep sends data, but the cutter cannot store it and it overflows.

  15. Pnc-960 stops cutting midway

    If all the jumpers are off position on your cutter, this is how your settings should be.. You told us earlier the only change is the USB adapter. They not all can be trusted. Sometimes the cheap ones are better.

  16. Pnc-960 stops cutting midway

    Forget Device manager, FlexiSign handles the communication directly.

  17. Pnc-960 stops cutting midway

    How is the Port communication setup page on Flexi look like?

  18. Pnc-960 stops cutting midway

    Wrong cabling or setup could cause data overflow.

  19. Pnc-960 stops cutting midway

    Where are you based? I have just finished the renovation of her PNC-1100 Brother and it works fine on Win10, with Flexi.

  20. Pnc-960 stops cutting midway

    Are You Using Parallel Port? What Widows version it is? I belive that hardware cannot fail.

  21. Omega 6.5

    PDF can be opened directly. You need to select one of the option on Open dialog box. (Vinil only, for example)
Top