Search results

I have many customers who are running styrene and cardboard on their Vanguard because of the high vacuum system. When running materials which may swell when printing dark images exposed to the uv lights, you want to run it in a fast mode to expose it to less light. For service- it’s best to buy...

I'm driving from NY to Atlanta to Fort Lauderdale this week if anyone on the east coast needs help on the ColorPainter line of printers. Bruce bruce@melloimaging.com

The fix for this problem is typically replaces the cap. Over time it flattens a little so it doesn't seal. Think of it as a suction cup. If you do a PH recovery and it looks fine but starts dropping nozzles after 5-10 foot of printing, it's a cap. I am a dealer in NY and carry these parts in my...

What I do here in the NY area is I give my customer the printer or cutter and let them try it out for 2 weeks before purchasing.

This is why Summa is doing well with its high end upgrade cutter with a camera instead of sensor. Many of my customers didn’t upgrade so they would print the cut reg marks on white vinyl, cut them out slightly around the black square and stick them over the marks on the unreadable marks. Good...

My smart customers who use the inexpensive Monomeric vinyls will print graphics a month ahead of installation. They have done entire room walls like this and get no shrinkage after install. If you print and cut right away and let sit, you will see the shrinkage occur because the backing paper...

So I see some of you are familiar with this sly corporation. Years ago they got into outdoor durable printing by acquiring the Seiko model and call it the 9000 solvent printer. It worked quite well but stunk badly. When they were ready to release their own Latex product so they switched the 9000...

I don’t sell inks for Hp’s but the guys who had them for years love the Nazdar inks

Are you near NYC? Bruce

What are your prices for a printhead and service? Do you have Oce service agreement?

Go Vanguard and you will be more than satisfied.

The way it used to go back in the days for the graphics people were they would print on backlit film, it would be slid between 2 sheets of acrylic with no adhesive. This way the store owners could change them next month themselves.

It definitely looks like an adhesive problem.

Look for a Mutoh firmware update?

Funny! I've sold and serviced 87 M64's in the NYC area and haven't had any problems with subtanks, always caps.

The error is from the subtank not going down in ink volume enough. This is typically caused by a cap that isn't sealing and needs to be replaced. Bruce

Press control while clicking cp manager version number. Go to Actuator tab, select ink pump 5 and send ink to cartridge for 2 minutes then stop with pump closed

Anybody on Long Island who needs it, I now have in stock! Bruce@melloimaging.com

Good points from all of you! I wonder if it's the same problem we see in Epson inks and everything from Asia- USA Ports are barely unloading ships and causing huge delays.

It's one of the best options for Wraps