Search results

Yes, that's the Flusing Absorber. Part# DG-40317 To order it, Contact GEI

Paper sensor was bad. GEI Replace it. Thanks!

Print a nozzle check, if K is not present , that could be the answer to your ?

You need to get a Value-Jet 1204 and a FC-7000 Series cutter:Welcome:

1) Take the top cover off and look for kinks or holes on the ink lines. 2) Take the head plastic cover off and inspect the dampers, they might be clogged , or an air leak. 3) YES YOU CAN FIX IT !! IT IS NOT THAT HARD !

Ink Starvation Might be a clogged damper, bad seal or a kinked ink line.

What do you recommend for Bitmaps in order to get a rich black ? When I print Black Vectors they came up just fine. I recently purchase the Aurora Fills I print them out and they came out all washed out looking. Just a problem with bitmap stuff, same thing if I open a photo shop file. How do...

You could done the X-length Adjustment on the Printer itself as well.

What Printer are you talking about ?

Do you have the Printer plugged directly into the computer, or is it through a USB hub, Rauter or anything? What's the IP Address on the Printer itself ? What's the IP Address on FlexiSign ? What's the IP Address for the Printer on the Local Area Connection ?

Hello Everybody, Thanks for you answers on this. I temporally fix the problem by turning the media Initial off. To me sounds like one of the sensor(s) failed. I'll be on the phone with Mutoh Today.

SHIFT + Quality generates a test plot.

I was trying to load banner material and I keep getting Undefined Media" error. -Media it is loaded straight - Cleaned the paper sensor. ( covered the paper sensor with masking tape ) - Tried different materials Any thoughts on this one ? Thanks!

Also If Micro-Dot it is ON will cause those Digital Lines.

If you already Print your Job(s) Try to change the Contour Options to Contour Job Only:glasses:

How long Did you let the Printer Sit ? Time for a new MS Station.

Awesome Valentino ! I am thinking about getting one . Where did you get it from ?

Hey Matt, Do you sell Caldera? Is it cheaper than Flexi ?

Justin, Just curious, Did you ever get this beast lined up ?

If you are printing 'sellable' images then I wouldn't worry about the check nozzle pattern. More likely that you had a head strike and the printhead and has scratched a line across the bottom of the nozzle area.