Search results

Justin, Your Dealer should have a "Syringe Kit " available. I got mine from a Roland reseller. Since Thanks Giving it is around the corner you can easily get a flavor injector syringe anywhere and that should work also. Good Luck!

Hey Justin, Did you get you Printer up and running again ? Please let us know what you did to fix it...

How do you know you have 3 clogged nozzles ? Did you count them ? Your print head has 360 Nozzles per color.

Try to call them

Try CMYKparts.com Get the heavy duty flanges Part# ZMY-46040

After reloading the Firmware, problem still persist. Mutoh is replacing my Inks !! Thanks to all for your help on this !:signs101:

Justin, On your Falcon Outdoor 48" , all the dampers are the same. Here's the part# : DF-40129 , ( you'll need 6 of them) PS.- How long have you been using Lava Inks ?

How long have you been running Lava Inks ?

CMYKparts.com I will replace the O rings too.

1-Use an Unidirectional Profile 2- Make sure Flushing it is OFF. 3- Make sure under Rip&Print the position it is set to .000 &.000 Good Luck!

"Lines in prints again!!!!" Justin , Could you please upload pictures that describe the problem you're having ? ( nozzle checks & any other prints )

I did a couple months ago. I had a problem a month ago with a brand new K cartridge. Mutoh sent me a K Smart Card. Everything was fine, until this morning I turn my printer on. I found this link at Mutoh's website : http://www.mutoh.com/kb/entry/5/ I'll try this , after I get done with a...

I got this morning, Turn the printer ON and I got "KCYM" Not original!! Printer was working fine yesterday, cartridges are half full. Using Original Mutoh Inks. Current firmware on Printer: 1.15 I put a new set an it works, What would cause that error ? And How to solve it without losing my...

1- Use your Color Mixer (M) and set Y=100% CMK= 0% 2- Set Vector to No color correction.

Valentino, Is this official ? Where exactly did you find this info ? I do not see any brochures / info at Mutoh's web site. Please share this info...

Here you go SignPost http://www.signwarehouse.com/support/index.php?_m=downloads&_a=downloadfile&downloaditemid=70 That should do it. "Do i need to do a head wash after I change it?" After I replaced mine I just manually draw ink through the waste lines to re-prime the heads.

Bogie that would be a good move !

As far as the AutoCleaning issue, I would definitely upgrade the Firmware. Current Firmware it is 1.10 Did Mutoh void your Warranty due to the fact you are using 3rd party inks ?

On the VJ I leave it as Default (same as preset) Bogie , did not know you had a VJ