Search results

-Take cover off printer and check to see if the ink lines have kink / hole or leak. -Inspect the right print head manifold, it is possible that you crack it while you replace the dampers. -Check the condition of the O rings as well. Just my 3 cents... lol

Nevermind, I figured out. http://www.mutoh.com/products/ValueJet/1204_Print_Speeds.html Thanks!

Hi we are new to the ValueJet 1204 v and need to get some idea of what the different quality settings do I . I have been usiing the graphics 2 setting and think I am close but dont know if there is other settings or better settings for this could you tell me what the different setting are good...

-Make sure all Nozzles are firing adecuatelly , especially M&Y. -Make sure your are using a CMYK color chart ( The Corel CMYK in flexi works well ) Follow this: http://www.signwarehouse.com/support/index.php?_m=downloads&_a=downloadfile&downloaditemid=104

You are looking at $500 parts ( 2 Print heads & 4 Dampers ) If you are mechanically inclined and if you have the MM. Replace it your self. If not, try to find a local tech with experience that will do it for you.

Find the line that runs the right head (MYLc) and use a syringe to manually extract the C left over.

Make sure the rendering intents on Vector ,text & gradient are set to no color correction and use a CMYK color mixed instead of RGB.

What version of Firmware is on your Printer?

The Voltage adjustment it is done only for STALLING issues. Usually the the printer stalls 20% 40% through. The carriage will go back to his capping station and following message will be displayed: “receive [Port2]”. I do not think that the Voltage has to do anything with Y errors.

Power off the machine and try to move the print head while holding the motor's shaft check to see if the pulley is slipping on the y-motor, if it is then the answer could be a new Y-motor .... Also try to add / loosen tension to the belt . Just my 2 cents...

I have a FO48" and I need to set Flexi temporarily on my XP Home machine Does anyone here have experience using XP Home ? Any Pros / cons ? I've heard some folks that run Home edition that had some connectivity issues ( with the Print Server provided from Mutoh ) Thanks!

-Once a year for general maintenance. - For storage the printer -for moving the printer You can use them up to 3 times. :peace!:

The mainboard is shared with the CAD version (RJ-900/901) of these printers. There are drivers available for the CAD printers for CAD printing. These drivers can't handle full raster processing. That's why TCP/IP it is required.

Chicago: where do you get the swabs from? Please supply the link. Thanks!!

A brand new set can be used, up to three times .

I would check first the amount of ink in the Black cartridge. If you already prime the Black head with a syringe and nothing comes through The answer will probably be a new maintenance station.

Welcome!! This is going to sound silly but make sure that the print head it is on the High position and try lower your heater settings...:Welcome:

A bet you a beer that it is either a kink on the line or a leak on the Damper

Right click on your printer in the production manager list and select Default Job Properties>Color Managment> Ink Limits> try lower the ink levels on every ink chanel 10% You'll need to do some testing until you get it work right.... :thumb: