Search results

a question for those of us who enjoyed physics class, exactly what does black reflective reflect?

That's the best way to ruin a good laminator. that and being careless with a razor knife

probably right.

it really doesn't take that long to cause a flat spot on the older, foam rollers.

we also have an OLD seal 400 with heat & a royal sovereign 65" but the daige is quite a trooper.

are you SURE there is not a flat spot? i have a 55 inch daige, that must be 25 years old. bought it used and the bottom rollers were TERRIBLE. i use it for nothing other than mounting to a substrate. i cheat and sandwich what i am laminating 10mm coro on the bottom, then my substrate, then the...

use a spray bottle, mist the substrate with alcohol. wipe with microfiber cloth flip substrate & repeat you say you bought a second laminator. the first was too small? you didn't have this issue with the first?

I got a dell optiplex from Amazon windows 11 pro 24h2 you can’t setup without internet 22h2 was not like that there are ways around it FOR NOW…

great!!

i have to setup a windows 11 pro pc later this evening i intend to create a microsoft account, the create login for "another user" local only give admin rights then delete the microsoft account

ok great i am working right now i can give you step by step instructions later this afternoon what we are going to do is CHANGE THE ADDRESS OF THE PRINTER TO 192.168.2.40 subnet stays at 255.255.255.0 ON THE COMPUTER we will change the ip address of the RJ45 ethernet port to 192.168.2.20...

ok. but please that is an ENTIRELY different setup if you are not going to answer questions, NO ONE can get you connected properly twenty replies ago i asked you to plug the printer into the router if i suggest something and you do not want to do it. just post NO we have 2 choices. move the...

did you plug the cable from your printer into a port on the router? did you set the printer to 192.168.1.40 & the subnet mask to 255.255.255.0 you can set the gateway to 192.168.1.1 but that step is not necessary power off and back on BOTH THE PRINTER &THE LAPTOP you should be able to ping...

its like a phone number. ANY NUMBER in the .2-253 range THAT IS NOT USED BY ANOTHER DEVICE will work IT SIMPLY HAS TO BE THE SAME IN THE RIP SETUP & THE PRINTER have you tried to ping the number 192.168.1,40 or whatever? there is no point to wasting time trying other numbers. set it the...

I have done this thousands of times but he is not posting results makes it kind of a challenge he gets to internet on wireless and was plugging in a Ethernet between an Unconfigured rj45 Ethernet and the printer IF he plugged the other end of the cable into the router AND changed the ip on...

so, from the laptop open a command prompt again <cmd> type ping 192.168.1.1 this is your gateway, the way out to the internet press enter and you should see then type ping 192.168.1.40 press enter you should also see 4 replies if yes you have communication with the printer's ip next open...

MOST but not all modern network cards autonegotiate. meaning you can hook up directly with a cable, instead of using a switch what he is doing is the same thing, his router serves the same purpose i have been networking printing equipment since the late 1980's (before networking was built...

If you are getting to internet on wifi give BOTH SETS OF NUMBERS If there are 2 sets

Ok

yes, lets post a temp and humidity