Search results

we need to know if this is the pc you are conversing with, before we change anything. your printer does not need a gateway unless you are accepting print jobs from the internet. IT DOES need a subnet mask.

NO DOUBT this can not possibly work. i still need to see what the computer settings are, BUT there is nothing you could put in on the pc to connect to that (1) post the ip settings for the pc hold down the "windows key" and tap the letter r (windows key is the one with the microsoft flat to...

stupid question, do you have a roll of media loaded? you need to & have run setup. if you do a cleaning, for example & leave at that screen, flexi will not "open port"

please post the ip, subnet and gateway of both the printer and the pc you have the software installed on normally this becomes an issue when you move a printer from one office to another or if the cable company changes a piece of equipment you will see something along the lines of...

zero nine have something similar?

i am the first to admit i am more comfortable fixing the printer or plotter when it doesn't work, than producing signs with it, BUT, why are the crop marks always FACING THE WRONG WAY. if you cut on one axis, the second crop mark is on the piece you throw away unless it is a trick question, the...

it will raise pressure in the pipe. STILL vastly better off with bigger fan even with a smaller pipe

when someone mentions COPILOT i always say it's like bing, only more so. whether that is a compliment or a warning is up to you

that is a 1204 GA can it still print the pre-grommeted banners from mutoh (if they still make them)?

i am not familiar with your unit, but, i wonder if it is waiting to "cool down" the spindle & possibly has a bad sensor or thermistor & is not sensing the cooling off effect

gino, i wouldn't let passersby stand by my exhaust fan "huffing" the fumes from my printers to increase the efficiency of the fan, you should have a small damper that can be opened on heavy printing days when we use the exhaust fan in the kitchen i crack a kitchen window open 1" the effect is...

all very true i keep a set of metric ignition wrenches by each machine. i find you are much less likely to break one of those nipples the damper sits on if you can give a very gentle twist with the wrench but probably the best money you will ever spend is getting a replacement manifold so it is...

Agreed we have gotten jetbest from premier for about 3-4 years i have seen lots of times where the changeover isn't a problem, but, sometimes one of the inks congeals& it 's too late to do anything about it jetbest is compatible with roland if nothing else, if you are going to go ahead, take...

we have had a roland sc545-ex since 2016 go a vj1617h about 2.5 years ago i find the rolands very easy to work on. (i am a former tech, though) i still struggle to understand what was in the mutoh engineering team's head, when they made some of their decisions. i wouldn't be afraid of the...

I would wait to see service manual. it MIGHT be a dip switch thing…

Budget for the he’d. that’s not an electrical problem

It could be partial clogged nozzles causing deflection, but, that head hit something. perhaps one of the Roland media clamps

i believe someone mentioned that you could upgrade by installing as a separate program. keeping the original version 22.5 intact and functioning assuming you have enough free space, that might be a really good idea

They can have a damper mark. Not ALWAYS. premier colour,is a reputable reseller we have bought inks & parts from them for probably 5 years. we use his jet best inks & bulk ink system

when i leave the house in the morning i often stop at the local dunkin donuts. they get their banners from dunkin (unhemmed) the banner changes every couple weeks, the wind will often tear a corner. i keep a handheld grommet tool in the car, so if i see the tear i will install a new grommet...