Search results

is ChatGPT that much worse than what we get from cients using CANVA?

Yes, consistent prices, Always ships on time. very helpful tech support

The machines have a purpose but a very limited one. and, you don’t truly understand the limits until you own one & have destroyed a couple marginal print heads

do you have a kitchen scale? that would answer the question. most of my gerber "toolkits go back to the plotters that worked with the edge's or the smc's i can't help on this one

i often will use a bottle of the flush or cleaning fluid your ink manufacturer sells if it appears not to be working, i will add 5-10% acetone. (10% might be pushing it)

they have the best support for what chemicals you use in the unit. it's worth a call to canada to talk to val if you run into trouble. i find AS A RULE this whole thing is very effective if you use the unit before it is apparent you have a bad head and need to flush. a gentle flush...

i bought a Chinese knockoff a couple years ago

did you buy a real print head doctor? what chemistry are you going to be using?

We own 3, but I haven’t printed on one in a couple years. didn’t the “trunnion” have a serial port?

i believe there are no 3rd party dx4 heads. there are bad heads that have been flushed.& perhaps aqueous heads that have had the manifold changed

it would certainly be advisable to usb a different port windows recognizes devices by a combination of port & whatever sort of device id am i confused? the edge's have serial & parallel port parallel is MUCH faster. i imagine you have the usb to serial adapter because it was used with your...

Smoke-jaguar do these have a ribbon cable that goes south like on the Roland’s? certainly there is a test & calibration to be done

does jetbest claim that the chemistry is completely compatable? i have seen people do this with roland inks, but, not with mimaki (we have very limited mimaki experience) francis from premier colour can answer that for you i imagine. ask whoever you bought the inks from

TRY THIS AT YOUR OWN RISK (it often works) consider using a cleaning cartridge with about 5% acetone in the cartridge pull enough through the tube to get the acetone reaching the printhead let that soak for a couple hours. do several cleanings now print a large rectangle to get the acetone...

it depends on how much you value the customer. you know about customer acquistion cost if it was someone i wanted to keep i would write it off as customer retention cost

I am not sure how often the scale samples for changes. Sample rate is probably the biggest difference between a $12. Scale and a $100. One keep in mind, the fact that it displays that many “least significant digits”:doesn’t mean the display will neccessarily update with the addition of one or 2...

It appears even these cheap,scales have accuracy to 0.01 gram...

it's too bad you can only hit the "agree" button one time Bob, you can be right and wrong at the same time. Kind of like schrodinger's cat. on top of all those variables we assume there is no variation at all in his hardware, room temperature, ink, from cartridge to cartridge, substrate or...

i have never ordered from digiprint, but it's time to switch to OEM dampers and captop, i think

Belts don’t get “oiled” perhaps some sort of belt dressing ( I am unfamiliar with this problem or noise) typically if a belt gets contaminated with oil, you replace it with a good one i have been servicing wide format printers like the old tech jets since the very early 1990’s and have never...