Search results

I take apart my used cleaning cartridges, cut a corner off the inside bag and pour the remaining 1/2 Oz of solution into a container and use it for general cleaning around the heads and caps.

I only do about three banners a year. I buy the Grommet kit from Harbor Freight Tools. It comes with a hole punch and 25 grommets.

I think it's called Felt. Very popular in the 90's and early 2000's. Good luck in finding it. I can't find 11x17 blue vellum bristol.

I buy the swabs from Amazon. Buy them in a bulk pack of 300 and clean your Roland on a regular schedule, like weekly.

I use 100' rolls. So I send approximately 30, 36" jobs to the printer when it's done printing I might add a few more depending on what's left. Or start the next roll and save the butt roll for one off's

See Impact1 comment.

This problem is looking like the media was not loaded correctly. We have a person that is a button pusher and tries to help out, but screws things up 30% of the time. He is great at packaging, shipping and knowing how machines work. But when it comes down to producing a finished product he is...

That looks like a little over spray. Just keep cleaning them once a week so it does not build up and destroys Your cap tops.

I don't think It's a shop temperature issue.

That clacking noise could be your media guides hitting against the print head as it passes over them. Make sure they are flat.

What printer? Pre Heat set too High

Reduce your pressure when cutting. If you are cutting into the strip you are cutting too deep.

Daytona Beach Florida just had Jeep Beach Week here and I was behind this. WHY!

Offer $1600 I just bought four graftec 8600-130 cutters for 10 grand, and they are in pristine condition. These graftec cutters are almost bullet proof.

Started out with the 60's but they burn up quick, that's why I use my old 45's from vinyl cutting. Now that I have six graftec 8600's and a 9000 I have plenty of used blades.

I use my used 45 degree blades from my graftec 8600 cutters. Cutting mag material burns blades up quick.

I attach a thin sheet of corrugated cardboard, ridges facing down. Printed and cut two 50' rolls today. I only have six rolls left and ordered another 30 rolls which will be here in 12 to 16 weeks. Glad I look into the future and not waiting till the last hour.

Never had a head strike. Knock on wood. If you set everything up right it runs perfect. 22 rolls in three months.

I print directly to the magnet material.. I load a 50' roll of 30" magnet material on my Roland XR640 and start sending jobs. Each roll yields 650 + - pieces 3.50 x 5.0 I cut it all on a graftec fc2250 within five minutes after printing or I set it up and print roll to roll and cut it all the...

Clear Decals don't have permanent adhesives.