Search results

If we have this issue and no time to get other material we will put down a white block out layer cut slightly smaller.

We make them out of flat cardboard or scrap coro. Two pieces and then some caps. Or just two oversize pieces and tape tight

That would be a great deal if in good working order. Plotter alone is worth that. Don't like no returns but if you're close enough to check it out in person...

Seriously, any holes in a roof is a bad idea, much less enough to hold a banner that large. Yes, you can fill the holes after removing with silicone or some such thing but it's always risky.

Yes, definitely mark on the backs of the letters & pattern their number (& direction for ones that can get confused).

Not sure there is such a thing, unless you are lining them up for a mortar line or raised seam We just use common sense based on the thickness of the material, the particular letter and letter height. Three studs on a T may be fine till it gets large enough to need 4 or 5.

You didn't answer my question. But here's my take. The Edge is an awesome machine within it's limitations. the biggest limit being the 11.8" limit, but tiling is pretty accurate and before laminated wide format prints took over the market we would use it for some pretty big jobs. For contour cut...

What is your application and which Thermal Printers are you considering? I have an Edge and I have tried a Summa and a lot depends on the end use

I would do a plate on the back, thru bolt, cut the excess bolt off and file down. Then put a cut across the bolt/nut (unless you use one way nuts) and cover with dab of construction adhesive.

That sounds like an aqueous HP Designjet, which I am very familiar with. A great machine for posters and interior work and a poor machine for exterior work. You will have to use coated materials designed for aqueous printers. You will need to laminate everything except posters. Even with...

Unless you are very handy and tech savvy buying a used machine without any kind of support or warranty is dicey. I have purchased used/rebuilt printers that came with a manufacturers warranty, I would look at something like that.

Gerber makes, or they did make, a floor graphics kit that included the vinyl and laminate.

Black on white

Wow, hard to find a cut vinyl only job. We got an Edge around '90 so even simple cut jobs often have a printed outline or shade. Here are a couple trucks that were all cut.

yep, thats what we went with

This thread is a year old, might want to post a For Sale ad

A billboard printer, for ones that large I have used Joseph Merritt they are or were a merchant member here. If you're not installing it (I wouldn't) just be sure they provide the exact specs.

Just give yourself a good margin and extra material for the wrap. That way exact measurements aren't critical

"Copyright your designs. That will protect them." Original designs are "automatically" copyrighted, now if you want to trademark them there is a process to follow. But your protection is only as good as your wallet can handle. "I generally don't do design work without a commitment" He didn't...

Yep, unless you want to look like a skunk you'll have to live with it. And you learned a lesson in marketing, you're the one that should have called the news first.