• I want to thank all the members that have upgraded your accounts. I truly appreciate your support of the site monetarily. Supporting the site keeps this site up and running as a lot of work daily goes on behind the scenes. Click to Support Signs101 ...

Search results

  1. 8600 cant cut holographic

    So when i print and cut it reads the crop marks and when it cuts its skewed
  3.

    FC7000 print-to-cut registration

    My FC8600 was doing that as well untill i changed the pinch rollers. now its perfect. i have 3 pinch rollers i changed all of them and also use the middle pinch roller. if the material is long the weight alone can cause it to skew
  4.

    is this feed calibration correct?

    so now its the bottom of my designs that are having a miss print
  5.

    is this feed calibration correct?

    so i did -55 and the next set they were all touching. i did a print and this is it now
  6.

    is this feed calibration correct?

    just did that and it printed much better just a little blurry on a couple spots above and below the design so adjusting it again and trying. will post a pic shortly. When i did reprint the test it showed 55 as touching and to the left they all looked the same its very weird
  7.

    is this feed calibration correct?

    im having issues with blurry print every other row. any thoughts?

  8. VS540 ICC Help

    because i use flexi and am used to it

  9. VS540 ICC Help

    just got a VS540 and need a ICC for CMYKcm green is printing very dark using flexi 19

  10. SP300V New print head help

    yes i have emailed the tech and will wait to hear back from them in the morning. temp is controlled not sure of humidity. using bulk ink but no issues with ink ever, head went out and had a third party service company come and change the parts out as the nearest roland service company was a hour...

  11. SP300V New print head help

    sorry that would help the head was installed yesterday and the nozzel test is horrible

  12. SP300V New print head help

    ok so i just had my magenta/yellow head replaced, new cap tops, as well as all 4 dampers. now any color with red or yellow is coming out super light, but blacks and blues are not effected. also kinda grainy on the new print head colors. nozzel test is fine as well. using Flexisign. cleaned...

  13. CE6000 and FC8600 Maintaince

    haha good to know thank you very much

  14. cut off by 0.100x0.100 CE6000 and flexi

    ok ill see if i can figure it out thank you

  15. cut off by 0.100x0.100 CE6000 and flexi

    where do i find that? thank you hope that helps

  16. cut off by 0.100x0.100 CE6000 and flexi

    both ways its still the same size its weird idk what it is but am adjusted for it now till i get it figured out

  17. cut off by 0.100x0.100 CE6000 and flexi

    they are 2 different machines on 2 different programs, maybe its a flexi sign issue

  18. CE6000 and FC8600 Maintaince

    lol i think so thank you

  19. cut off by 0.100x0.100 CE6000 and flexi

    yeah it was when we cut the same design on 2 different machines then i was like wait a min lol i see the scaling on flexi set to 100% is there a setting on the cutter itself that may be automatically shrinking it by 1%?

  20. CE6000 and FC8600 Maintaince

    thank you, what type of grease do you use? i never got a manual as well the place i bought from i would never again cause they acted as if this sell was beneath them lol but oh well lol thank you

  21. CE6000 and FC8600 Maintaince

    is there a maintenance protocol for these two equipment? like greasing any parts or tightening of things havnt found any videos or pdfs about that
Top