Search results

When you say "fence banner", are you referring to mesh material? there are plenty of MM here that can do this product. since you want multiple years, would suggest reinforcing the corners/edges

Us a hidden steel frame (heavier than aluminum) Then skin the frame, we typically use ACM mounting to the frame, that is more of a matter of how easy do you want the installation to go. an eye bolt in the sign frame and the wood frame, using a Coupling Link to connect them

Yes, and this is one of the MANY reasons we refuse to have the "voice" terminals (alexa, google home, Echo, etc.) https://www.nytimes.com/2018/05/25/business/amazon-alexa-conversation-shared-echo.html

We regularly go to a "pipe yard" and get the used pipe, which is a fraction of the cost. regardless of new or used, the pipe will have to be prepped and painted. granted you have to follow specs if they list a certain type/grade for the pipe.

+1 for the grommets as mounting points. short term = zip ties through grommets long term = (again use zip ties to hold in place) use a toggle bolt through the grommet with a washer on the face so the bolt does pull through

This is a case of the cart being put in front of the horse. The design SHOULD have been dictated by what can be created/installed. is this compliant with the sign code for the area? safety/wind load compliant. Where & How is the power going to be running Etc. There have been several threads...

send it to The Vector Doctor

Also, agree and would like some more information

Try Orbus https://www.orbus.com/

laminating perf is all about the setup. make sure the pressure is correct - less is better make sure the lamination is webbed / feeding like glass

look at Trello

What your budget for the printer? that will be your biggest decider for the printer type There are members here who sell equipment, contact them and see what they offer in your price range. I would go with a flatbed and then apply a UV lamination over the print

Looking for this frame, or a like freestanding sign system. have already tried displays2go and outwater plastics overall height is adjustable area sign is held is adjustable. interior grade unfortunately, this is the only image provided by the end customer of the frame.

Very clean install and that font does sell the design layout. Do you have any images of the back?

Do you have a link for the webinar?

We make our table throws as a Loose/drape cover. However, we have a project that calls for a "stretch" We currently are looking for a 4 Sided option, see the image. Any suggestions, Thank you

so are you buying sight unseen or at an auction? cuts/damage to the rubber pressure wheels flats spots on rubber wheel try to adjust the wheels and see if there is any sag or one area touches more than another. wheels rotate/turn smoothly and easily powers up and runs

651 is going to be hard to install. you want a better grade, ideally one with air release / repositionable. Using a plotter vinyl is better VS printed for longevity. Use a paper transfer, start in the middle and work out using the "triangle method" for installation

EXCELLENT ADVICE!!! This thread has digressed enough. Please remember that this forum is only as positive OR negative as the contributors. We (members) can either "try" and act civil or turn it into a "he said, she said, they said" poop slinging fest Thank you for your time and PLEASE ENJOY...

We have found the invoicing of the product and labor are placed on separate invoices works good, This way as soon as production is done you can bill them, and then bill once installation is completed.