Search results

I don't know nuthin' 'bout birthin' no latex... so how difficult is it to change heads and re-register them? Once changed, do you have to re-linearize or recalibrate for color fidelity?

12 liters per color sure seems like a low number to require replacement.

Offer to put him on your payroll as a 1099 contractor and see if his story changes when he realizes he has to pay taxes on the "commission".

How many? I do them all the time for high school booster clubs.

If you are in Atlanta - drive down and see the CET models in action for what you would spend for a GS Vutek - you could get 2 CET printers - depends on your needs, though.

How many Jetrix printers have been sold in the US?

Or fabric with silicone bead sewn in and inserted into preformed curved structure with channel for bead to sit in

Depends on your inkset and your max density desired. If you print too rich of a black with alot of flatbeds - you will get a thermographic feel to the ink. Some inks print grays cleaner than others. Mine tend to lean to the yellow side, so i use 50, 40, 20, 100 for my blacks. Debating...

Tim, These are poly banners printed on large rolls by flexo process for like .30 a square foot. None of these guys can do that.

Finished product.

Anyone got a source for long rolls of poly banners like you see at motocross events. It is very thin material and what I have found is flexo printed with 3000' minimums. These would be used once and tossed at each event.

What combo of speed and quality are you looking for?

I do 8x4 signs with alumacore all the time with two posts and no brace.

Should also try Mandel Corporation in Milwuakee. They print for me. Georgia Printco is working on it as we speak. Custom Printed Fabrics in Chester, SC also.

What's the problem? Sticks to the vehicle... check. Conveys the message... check. Cheaper than dirt... check. I know you have all seen the chinese printer that prints directly to the side of trailers... thats the future! http://www.youtube.com/watch?v=bL05DFVnp5M

Mike, I have been by their booth at several shows and had my "medicine man - snake oil" doubts about that product, but if you say it works I will look further in to it. They also have a new wide format wand that I might try. My other question is - if it works - how long does it dissipate...

Static + Humidity I have two humidifiers going through 8 gallons of water a day and its a struggle to get humidity near 45% on a consistent basis. Was contemplating one of the ionizing air nozzles, but have no experience with them and they are pricey.

For $200 a month i wouldn't lose any sleep over it. I would maintain the relationship as is from your end like you don't even know and continue to provide good service at competitive prices.

Anyone got a US resource for reflective printable banner material? Thanks

I know I have seen threads on this - but they don't come up in search function for the site. What is everyone doing to minimize or eliminate static charge on styrene or similar materials? Is ionizing bar or wand best way to go? Has anyone had success with the Staticure wand from the Stop...