Search results

Hi there! We have a VP-300 main board go bad, so we replaced it and I am trying to run the reinitialize limits. I lock the carriage (making sure it's locked), start the process, slide the cutter all the way left, hit "enter", the cutter moves right, gets to the end, does it's wiggle but then I...

Hey thanks!

So our VP-300 died, first we got random "now processing" error, and now the unit won't turn on. We ordered and received a replacement mainboard, but we have been told we need "parameters from the old board to put in the new board". This doesn't seem right to me. Has anyone replaced a mainboard...

Recently had a print-head replaced on my VP-300 (cyan was misting like a mofo), but unfortunately it was done over the weekend when I was out, and someone neglected to check for print quality before the tech left. It now appears cyan is out of alignment, as are the cut lines (I have a feeling...

It's strange. If I do a test cut with anything under 100gf the square comes up with the circle (technical I know). This is with the 3651. Originally it was a print+cut with full bleed, but currently I've been trying to figure this out with just the cut, so I haven't actually printed ink with it...

This is unlaminated. And thanks for all your responses!! I'm doing a little reading on the different materials and am going to try with a lighter pressure and practice my weeding technique. If I have any results I'll be sure to post it in case someone else has the same trouble.

The strip is new or at least I don't see any wear. Does having the heater on cause the adhesive to "melt" back together? Also the heater light on our machine keeps flashing green. I assume green means OK but flashing?

I'm brand new to the sign making biz so please go easy on me. We just got a Roland VersaCamm VP-300 and a roll of Orajet 3651G and some other sample material which is I believe 3165G. I am doing a small job that is text only about 3/4 inch in height (Print +Cut) and having a hard time weeding...