Search results

Looking for someone to print and laminate on vinyl, Just got a job for 20 3'x4 signs, can anyone recommend a reasonably priced printhouse for this? Not looking for "dirt cheap", just a reliable, quality shop with decent prices....the addition of a new baby just makes it impossible for me to...

The ole DIY worked.... Saved myself 500 bucks..... I ordered a gear from McMaster Carr (thanks to the link in the other post) part number is 57655K36. I don't think it is an exact match as the old gear, but it seems to work fine. I took the old gear out, dremeled the chewed up gear off and...

The ole DIY worked.... Saved myself 500 bucks..... I ordered a gear from McMaster Carr (thanks to the link above) part number is 57655K36. I don't think it is an exact match as the old gear, but it seems to work fine. I took the old gear out, dremeled the chewed up gear off and ground down...

just ordered two of the gears that are close from McMaster Carr. Gonna try to see if I can glue either one of these on and get this to work, they are close but not exact...... For $2.50 this hopefully is a cheap fix.... I'll post up here after I try and let you know if it works

Any luck on that file? Would like to get this guy going on making that gear, get the ole girl up and running again.

The vector file may be the ticket.. If your gears are close that should be allright. If it eventually shreds the ink pump gear at least that you can buy for around 100 bucks, and your not looking at a whole maintenance station at around 450 like I am now. Could you email that file to...

Any chance you may be willing to sell one of those gears you had laser cut? I found a Guy here that can Make that part out of aluminum but my small gear on that piece is so gone that he can't get decent dimensions for the teeth. If i could get one of those small gears from you, I could...

I've had this happen twice, and am now out of spare parts to fix it. I have had a line get caught in the gears of the ink pump, and it releases ink all over the maintenance station. Most parts are fine, I can clean them and they work, but there is a plastic gear that drives the ink pump that...

it was just a bad connection....After messing with that same plug for about an hour, finally it connected the right way and all is good.... Talk about a picky little thing....

I had to change some components in the capping station on my outdoor jr, and when I plugged the connector ribbon back into the board with the LCD screen, I just get squares now on the display instead of the normal text and commands. The printer works fine, it's just that the screen only shows...

Can someone help me to print a decent orange with a falcon Outdoor Jr. and Oracal 3651 glossy? I have tried a bunch of different CMYK and RGB combinations, but it seems as if it is either red or a real brown orange. I'd be happy with just a decent, normal orange. Anybody help? thanks,

The guy from CMYK parts told me to buy the pump for a 46" outdoor, to use in the Jr. He said that all I needed to do is make a new hole to mount the pump on, as it is a little different than the jr. Has anyone else done this? can you still use the same pump transmission gear to this pump, or...

I only use the eco solvent ink in this... no second party ink.... I'll give that guy a call... I've had both happen, the lines get stuck in the gears after shifting, and also having them just split along the side as if it is just to tired from being "pumped". Regardless of which type, it...

I've got a falcon jr. And have had this happen twice recently. Either they get caught in the gears, or just split, but the white rubber lines in the ink pump get cut, and let ink go everywhere in the pump and maint. Station. I've pulled everything apart and cleaned it, but can you just replace...

Thanks guys, I have already bought the system, the rep at Cadlink told me it was an easy process to get it to work. I have a few things to try tonite, if they don't work, I think I'll just do the upgrade to Windows 7 and hope that will be better to work with.

The website also says this: SignLab 7.1 Build 9---- Shipping as at April 13, 2007 SignLab Supported in Vista (32 And 64 Bit) I called the rep from cadlink and he said that it will work with some "builds"

Just bought a new computer with Vista (64bit) system. I am currently running signlab v7.1 which runs on the machine, but I cannot send any prints to the printer. The program acts as if it is sending a job (like my old computer) but it seems as if the printer can't accept it. Is there a special...

Just bought a new computer with Vista (64bit) system. I am currently running signlab v7.1 which runs on the machine, but I cannot send any prints to the printer. The program acts as if it is sending a job (like my old computer) but it seems as if the printer can't accept it. Is there a...

I think I may need to replace the T fence on my mutoh. I'm getting the overcurrent error and have tried everything, and now find myself looking at replacing parts. To replace this, is it as simple as remove the old and install the new, or is there a calibration, etc that must be performed...

I used lithium grease last nite, and it worked fine. You're right the very little you use I figured Lithium would be allright.