Search results

EXACTLY "what" do you mean by the term "BEVELED"? Like this example??

Thanks Brian. I will look at your approach to see if it will help reduce my time routing and finishing the signs. Currently I am having to do a lot of hand finishing to get the "offset" areas to blend into the wood grain effect. Your approach to "pocket" letters and graphics as a seperate step...

Thanks Sandman. I will look at your approach to see if it will help reduce my time routing and finishing the signs. Currently I am having to do a lot of hand finishing to get the "offset" areas to blend into the wood grain effect.

Sorry Martin; this is a CNC Router issue. I think the other answers below are moving me in the correct direction. Thanks for your imput though.

I need help getting routed woodgrain effect to come up to edges of letters and graphics. Anyone got some handy tips to accomplish this? Thanks in advance for any help.

This is just MY OPINION; placing the control of the finished product into the hands of a generally untrained client is going to lead to MAJOR issues down the road. IF you give them a "variety" of choices on exposure, and saturation, you WILL end up with problems. It should be YOUR decision on...

Thank you for correcting my request. You are correct in the fact that I am looking for down grading the PRINTER FIRMWARE: However, I believe there IS a way to do this. I just would appreciate it if someone who either works on these machines, OR has hands on experience doing this could/would list...

I am looking for ANYONE who has successfully downgraded their PRINT DRIVER software, to load Mimaki printer software that is at OR below print driver 2.2. MIMAKI JV 33 Print Driver SOFTWARE I am replacing the printer MAIN PCB, and it came pre-confiqured with system 4.75. I have been using 2.20...

WANT TO BUY: I am looking for anyone who has a JV33 that they are interested in selling for parts. MUST NOT HAVE electrical board issues. I am in need of Main Board, Slider, etc. what do you have? You can PM me here on the board.

I hope this will help you. I did a Google search, and found this video. Mimaki Print & Cut workflow with RasterLink Tools and Illustrator - YouTube There was also several links to Mimaki operator manuals. Those are given to people to READ and learn. There should also have been instructions...

Perhaps the "problem" you are attempting to correct can be looked at from a slightly different approach> {1} unless your cutter can "see" registration points printed on the material, it has no place to position the START point at. {2} I do not know IF you can print just the registration...

Andy: According to the test procedures outlined from Mimaki, these "capacitors"? as you refer to them do NOT carry voltage. They are to fall into a very narrow range of OHMs. 17ohms to 18ohms. no more no less OR they should be problematic. I have not been able to locate a specific schematic...

I have tested my JV33 main board. Found TP8 was below specs. Does anyone know exactly what the components are called that are soldered on the main board areas TP1-TP8? They are extremely small components, and even under high magnification I can not find any markings. ANYONE? know what these...

Jimmysigns: I received your PM on Sunday, and have been extremely busy so that is why I have not gotten back to you till now. FIRST: Thanks for PMing me. your response was appreciated and I understand the reason for keeping it private. SECOND: And this is for anyone following this thread, or...

I just had a thought. Is there ANY sign people who are in close proximity of the address of this person [service]?? Would someone be willing to verify the address and any local info regarding the viability of this 'so called' service provider? I would certainly be up to help someone asking...

Thank you for all the feedback. It will help me as I work through my problems. I also hope this thread {IF KEPT ON TRACK} will be helpful to someone else when they come up against repair issues. Just a side note: To Player. Do you have PERSONAL experience with this guy? If so perhaps you could...

Thanks SightLine, I will contact them on Monday to see what they can do for me.Any other people who know of Good / Great vendors that repair boards??

Thanks "bannertime" I DID do a search, and though the person in question does seem "questionable" there where several replies to that thread that left questions unanswered. I posted with the hope it would not only help me, but clarify for others as well whether this person was a safe person to...

I am in need of HELP! I am looking for anyone that has had dealings with MacMedia from here on the board. I have a JV33 printer that looks like it needs repair on the main board. I have had a number of email discussions with MacMedia, and he {kent} seemed very helpful. I sent my main circuit...

Laminator I have a Royal Sovereign Laminator 64" with Heat/ cold settings. I bought this new a number of years ago, and due to a major shift in business direction barely used it. I have had several health issues lately, and am in need of immediate cash to help my family through a rough spot. I...