Search results

Daige I use my 38" daige almost every day and have next to no issues with it. I have screwed up way more with the "Big Squeege" then i have with the Daige. It all comes down to the user though. Even when I first got the daige I didn't mess up a lot. I just bought a UStech 65" so I listed my...

I have never seen this error before and nothing comes up with I google it. "Larkscale" is all that the machine says. CE5000-60 Flexi pro cloud I feel like my graphtec has a virus or something. I am contour cutting decals and its no longer reading the registration marks. The media is...

Problem solved. The new MS cap was not sealing around the head of the printer all the way. It sealed around all of them but the set of black ink on the head. I changed it for the old cap and it cleared up my whole problem.

Thank you for the ideas! I changed out the oring and it solved my air in lines / ink retreating however now the dampers stay full but no ink will drop into the print head. I swapped dampers and it didn't change. It is my first black one that doesn't fill with ink regardless of what damper is in...

Hey guys, First off, Sorry for only coming when I have issues and not really adding to the value of the forum. I'll start bumming around more often. My Mutoh 1204 With OEM Inks New maintenance station and new dampers is have an issue with my black ink. My ink ran out on black and the printer...

I am getting some vertical lines in my prints and I don't know what is causing it. I have a Mutoh 1204 Flexi Pro Cloud Perfect nzl check I want to say that it is a damper issue because it is still laying down ink just not enough. The problem with that theory is if it was a damper issue it...

This morning my Cyan was printing black, After some reading I did a few strong cleaning cycles then I printed some 48"x6" Cyan only prints. I ended up printing 8 of them in total and each one got lighter and lighter. By the eighth one it was looking good again. Every time I park the head in...

SOOOO MUCH BETTER!!! Cleaned the T-fence and it prints so much better! Even fixed a slight magenta issue I was having. Thank you guys for helping me figure this out. I knew it had to be something easy.

I'll clean it right now, but there is no noise at all. Super quiet.

I have tried a few pattern's Fine and fuze1 Wave2 fine fuze 2 I haven't cleaned the strip yet. Did the head slant check and adjusted everything. Its dead on.

Looking at the strip it does look a little dirty and I wouldn't call it clear by any means. What can I clean that strip with?

I don't think it can be the file itself because it does this with everything we print. Some times it shows more then other times. It might be a Rip issue but I am running the newest version of Flexi.

Vertical Lines Issue ** FIXED** We have a Mutoh 1204 Printer. We just did head slant checks, weve used different profiles, we just can't figure out what the problem is. Its kind of like banding expect for its going vertical. Check out the picture, anyone have any ideas?

Cleaned the Sensor, It would not run the Calibration correctly for some reason but I did adjust the sensitivity and it help a lot. Seems like it is picking them up much better. I have had better luck with the Option 2 marks. So I place the blade just on the outside of the mark and it scans...

Hey guys, My name is Jason I am new on here. I have run into an issue with my graphtec and I am looking for some insight. I have had my Graphtecs for many years and I have a decent understanding of them but this one has me stumped. I just picked up a Mutoh printer and have been using it to make...

Fixed the issue. It is silly now that I know what it was. The print head wasn't sitting flush with the bottom. I readjusted it and now the cap is sealing and it is print great. Did a few head soaks and I got all my nozzles back. Thank you to everyone that helped me explore options for fixing the...

Thank you so much for the response. It seems odd that the maintenance station is failing to be because how smooth it was running a week ago but it is possible for sure. The dampers are all half full (I had to us a syringe to get the black one to fill). I pulled a lot of ink through the line and...

I did pull the ink through the line. All the way into the damper and it didn't fix the issue. Is there more to it then that? What else should I do?

Hello, I just picked up a Mutoh VJ 1204. Before I picked up the printer we did some test prints as well as a nozzle check. It was 100% perfect. He ran some cleaning fluid through the lines and set it up for me to take it home. It was sitting in the box for about a week without anything but...