I want to thank all the members that have upgraded your accounts. I truly appreciate your support of the site monetarily. Supporting the site keeps this site up and running as a lot of work daily goes on behind the scenes.
Click to Support Signs101 ...
My Sp300v needs a part... Specifically it needs the copper part that holds the wheel for the wiper belt.
Mine disintegrated... i touched it and it literally fell to pieces.
Not sure that trying to fix it would work it's really thin and flimsy.
I have no idea what to call this part, I'v...
THANK YOU! I don't know how my file changed, but this fixed it. Could of been a corrupted rip file... and changing the margin and re-ripping fixed it. Either way, my design is cutting all the way around!!!!!! Thanks Again! - Lisa
Not sure if this is a software or a hardware issue, but it's only happening on some files...
I'm printing a decal using versacam, marching ants are showing all the way around the file (a simple rectangle) when the sp300v runs the print it only recognizes two of the four sides of the cutline. I...
HUM... perhaps there is something else going on then... I'm not getting any suction when I try to draw in through the captop. Captop is new and had suction before I blew the fuse. Fuses are replaced now, and testing good, but I still don't have any resistance when trying to draw ink through the...
So my roland versacamm sp300v is down, need fuses. I currently have the heads parked in the capping station sitting in cleaning solution (no Power). how long can they stay like this before I risk damaging a brand new print head? Fuses should be in in 3 to 4 days! Thank you!
Ok so I'm back... new printhead works perfectly, now after replacing the fuses I cant seem to pull cyan.
I thought I had all the air out, but I'm only pulling black at the pump. I used a glove to block off the black ink at the damper and I cant pull cyan through the line, I can pull it at...
well, the new head is installed the fuses are replaced, and I still don't have any ink on vinyl.... I'm struggling here, please help... I just get nothing when I do a test print. I have "pumped up" the ink several times, no luck. I used a syringe to draw ink through the dampers (new) and had...
Thank you all so much for your help!!! i installed the fuse holders (VanderJ ... you rock) popped in the tiny tiny fused and I now have power and the fuses are testing out perfect!!!
This forum is amazing
And Jim, thank you for the detailed information, I did just that and now if I ever blow a...
I like this plan... so just to clarify you took an inline 1.6 fuse holder and soldered it to the end of the fuse that was still soldered to the Main Board, thus creating an alternate circuit (and giving yourself a much larger surface to solder to!!!)
WOW... those are the smallest fuses I have ever seen... (provided they are the two directly under the ribbon cables on the main board)... bad news, mine appear to be soldered in, can i buy the socket and have that soldered in? or do i need to have the fuses directly soldered? PS... I did place...
Okay, so I've been using my sp300v for a few months now, (it's new to me, but used) i was gone for 10 days and when i came back I had NO magenta but some yellow black and cyan were fine. I tried unclogging the magenta and yellow print head... no joy, in the process of trying to unclog it...
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.