Search results

Sorry, disagree

Never had a problem doing it with the roland and then it would be printing and not checking while I was off doing something else. The level of automation is not necessary, IMO of course

No it about the all the checks it has to go through, finding edges, finding the front edge, checking skew blah blah blah, the Roland you just line up, drop the clamp and away you go, if you didn't put it in straight that's your problem. The HP has made it into a plug and play machine so that...

I agree the set up times with HP are a killer, they need to have absolute control over every stage, we have the same with the 365. Our old roland XJ you could just throw the stock in and press print and would be going within a few minutes from cold

Thanks, perfect. I had heard that it didn't need as much heat to cure which is good as some stocks just wouldn't go through. Are you happy with the machine?

I was kind of looking for a review of what someone who has one already thinks of the machine in general not how good it is at specific things although I would imagine it can print all of those things you listed. To be more specific re ml per sqm, just looking for generic standard vinyl middle of...

Hi guys, I am considering upgrading our HP365 to the HP800w, those who have one what do you think? Also do you know how many ml coverage is for a sqm?

Thanks Flatbed, we are in Australia but thanks for the offer. We had a Z83 blade and tried that and it made a massive improvement, only got a faint amount of the dragging at the start of the cut

Thanks, I'll start trying some different combinations

Hi all, does anyone know why when we mount a laminated vinyl to a substrate and cut with a drag knife (usually Z10, Z11 or Z46) we get this strange jagged edge, get it on all stock that we mount to PVC, corflute and magnet stock

Thanks balstestrat, is the a guide anywhere or manual?

Hi all, Do you know if the HP360 PIP fits the 365 model, I can't find anywhere to buy a PIP that says it is compatible with the 365

The printer is a Handtop 3200 with Kyocera heads

I don’t know either, they aren’t branded. Here are some pics

Hi all, I need to replace my led water cooled lamps, where can I buy these direct from the manufacturer, I’m in Sydney? Dan

Hi all, I have made a new profile through Caldera for poster paper to print on a Roland and did a comparison print of the same file through a confirmed profile through versaworks. The one that I created has come out dull on the blue sky parts (see attached - versaworks on left, my caldera on...

Hi all, I am having a bit of trouble with Calderas so called customer care service. I have V11 (which they tell me is no longer supported) and have 3 x licences that I bought. 2 of the licences run Grand Format Printers and 1 x runs a Large Format Printer. A while ago we decommissioned one of...

It's a 2007 G3 with a static bed. I can hire the truck and forklift it on but wasn't sure if it had to be stripped down or could just be moved in one piece and then re-set up at the other end.

Has anyone had any experience in moving a Zund flat bed cutter to a new location? Can it literally just be picked up with a forklift truck and put onto a flat bed truck or does it need to be stripped down first?

Ok, so I've watched the sales pitch videos for the GS3 inks where they say it can be laminated and dispatched same day but of course I can't find anything from Epson that says how long to wait/degas. I have a HP latex 365 and we can pretty much go from print to laminator with that, how does the...