anapurna

Looking for someone to service an Agfa Anapurna M4F printer. If you are interested please reply to this thread. Has two problems: 1) System Error E-1 Servo Encoder, Carriage does not move at all 2) Magenta printhead does not seem to have power (no LEDs lit up). Trying to start up...

So, we have this dinosaur AGFA Anapurna M4F - and usually she works like a champ. Lately, it's been printing crookedly, though. We've messed around with the belt (all good there). It seems like the media set bar is off by about 1/8", though. Anyone know how to straighten that up? The manual we...

Our Agfa Anapurna M2500 is not currently working. The inverters, lamps, and most of the hardware is fine, but it has a problem printing with the image not aligning properly. I understand it may be a wiring harness issue, but do not know for sure. Either way, we're moving and not taking it with...

Having issues with AGFA M4F not wanting to print pure color. The print will print perfect color and density for about 3-5in then it will slowly bleed off. Had to reinstall the wasatch application a few weeks ago and lost all ICC configs, slowly trying to recreate them but still cant seem to get...

Hello, First time posting here, hopefully I'm in the right section. We've had several issues with our Agfa Anapurna M2050 Flatbed Printer on and off since we got it, and usually solve issues but encounter another soon after anyway. I was wondering if anyone knows of a company within the GTA or...

We have an Agfa Anapurna M2500, which we've generally been happy with. But sometimes it does odd things, like now. The screen showed black ink needed refilled, so we refilled the tank. After it was refilled, the screen still showed black as "Empty" and gave us a warning before we printed...

Mornin'! So all this week, our Anapurna 2450fb has been flashing errors at me that the waste ink tank is full. Every day this week, I've tried to empty it to no avail. I know I'm in the correct spot. I open the valve with a container under it ready to catch the flow and nothing is coming out...

Hello everyone! I'm trying to setup for the first time a Afga Anarpurna M with Onyx 10 and can't make it work, the onyx says "cant connect ip" but the Ip respond to ping and the machine has the ip setup, I don't know if there is something to put in the "port configuration" under the ip number...

newly brought a used agfa anapurna m2. its cheap because 3 printhead are gone.I brought a new one and confige it to 4color. everything seems good. so I start my first job.nightmare came. did a test print,all the nozzles fired properly.but just print 1feet, half nozzle are missing. cleaning,then...

Hi There is a anapurna m Agfa printers. Not start printing I tried Onyx 10 and Colorgate7 connect ok I send a job I have not done anything . When I take it out online from You ask the printer / Print terminate ? (Enter reason ) no esc What could be the problem? The PC is connected directly to...

We are looking to buy a used flatbed printer Currently we are interested only in Arizona GT's and X-Series X500 but if there are reasonable offers for similar printers i.e Agfa Anapurna M2050 or EFI Vultec t1000 we will listen to it If you have some information contact me here or directly on my...

I am the lead operator here at Premier Press and would like to get a group of people together that run the same equipment to help each other trouble shoot problems. We run a Durst Rho 800, Agfa Anapurna M, Mutoh Toucan LT, GBC hot/cold laminator and a Gerber M3000 cutter. If anyone operates...