dropout

Just occurred this evening, cyan or lt cyan drip on test print same spot each test. The light cyan dropout has been there for a while and think it might be the cyan head. Anyone see this before with the test print little pool of blue being dragged? Captops are in good shape and just changed the...

I have problems running white ink jobs on my Oce Arizona 318 GL. The white ink will all of a sudden stop spraying when the reservoir is being filled and then drop large drops of white onto the flatbed or material. I've replaced ink the filter and bag and one of the hoses. Does anyone have a...

If it's not one thing it's another. I've been playing with settings and profiles to dial in my colors. I finally got all that pretty close, and ran a long print on reflective (7' long). At the last 8-12" of the print the black began dropping out and you can see banding. It seems like I read...

Hey all, I have two issues with my Soljet XJ-740. Issue 1 First is that the material sensor will not sense the right edge of the material. The Roland XJ-740 will no longer sense the RIGHT edge of the media. It constantly picks the exact same position on the RIGHT side no matter where I put...

Noticed a stripe of lighter colour in a single pass on a display we printed, only in the are of the image that was red. Ran a test print, and sure enough, all colours are fine except magenta. Prints perfectly for about six or seven inches, then a light stripe. Sometimes it's just the one...