epson

I've only tried vinyl, but I'm having a lot of problems. I'm using Orafol 3561. It warps from heat and it's impossible to laminate. What should I do? I have to wrap a 15-meter truck next week.

As the title says am wondering that if epson rip has a print a cut option , I run 2 graphtec 9000. I need to buy another rip ? Sorry for the bad englis

Sorry, I know this type of post probably gets annoying to some people, but I'm hoping one or two people will be able to guide me in the right direction. I currently have an Epson Surecolor S50675. It has been fine for the most part, but I've had my share of frustrations with it - mainly head...

Hello printer is about 2 years old. Print a couple times a week getting some banding now did a nozzle check and some lines were missing did some heavy cleaning and its all good. but now but after a wallpaper printing getting bands again so i check the nozzle and is clogged again so did a light...

hello everyone, Defiantly new to printing and tried to search for weeks about this code before asking. i recently purchased a used 80600 that needed "heads" i say that because that's all that supposedly it was throwing a code for from the seller if true we will never know. Had a tech come and...

Hi guys I would like to know how to set up a repeated pattern every 24" for printing so that customers can buy rolls/panels and overlap the seams to continue as much as they need. what I been doing is resizing the patten design to my preferred size then filling up the document in photoshop then...

Where can I buy an Epson 8550 printer for DTF . Cannot find one anywhere unless I am willing to pay twice for what it is worth. Just want to make some t-shirts for my vinyl and wide format print customers as I get requests. From what I have seen these printers are 19" wide format think tanks...

With CobraInk closing and my apparent inability to fix the 1430 we got from them, we're looking at getting an Epson Surecolor F570 Pro Sublimation Printer but I have Questions(TM) about it before I tell my boss we should get one. I have only very little experience with the ink transfer we were...

I am going to look at a 2016 HP 315 from the original owner. It has been kept in an extremely clean shop that didn’t use it much per a personal friends information that works at the shop. It is not a sign shop they primarily do embroidery and heat pressing. It has been serviced by an HP tech and...

Every time I hit print, my Epson SureColor S70670 flips the surge protector. Eventually, when it's warmed up it will print. Should I get a battery backup or plug it straight into the wall or what?

Reduced to $5950 Mimaki CJV300-160 High speed print & cut machine. Low hour machine! One print head is missing some nozzles, but otherwise a good working machine. This machine has (2) print heads, and one print head is perfect. It has a feature to use other nozzles to print the missing ones...

first sorry for my english we mainly do diecut stickers . and we need a reduction in production time (print time) our current equipment is slow two muthos 1604 . we are currently printing 12 hours a day non-stop I have several doubts but mostly with the 80600L the use of ink of the 80600 is...

I currently have two Epson Stylus Pro 9900s and an Epson Stylus Pro 7800. One of the 9900s is 13 years old and needs at least one new printhead. So I need to buy another large format (44"). I'm debating about switching over to the Canon imagePROGRAF PRO-4100. I see that you can change out the...

So we just had from Christmas eve until today off from work. I expressed concern about leaving the printer and a few of the guys who would be here throughout the week assured me they would shake the white ink cartridge. Well yeah, they admittedly only did once. We didn't put it into storage mode...

So the guide and video from Epson just shows the guy wiping the other edges of the print head but are we suppose to wipe in between the channels like this video here?

Hello was doing some wall murals panels and suddenly on certain panels i was getting these wierd lines across? My Yellow was low but it didnt tell me to replace yet but i changed it anyway and the problem went away. after a couple more jobs it was working fine until the Black was low then...

Hello just wondering on what material does the Epson R5070 resin printer prints on? Im assuming it need rolls for aqueous since its water based like Hp latex? or does it work on solvent material too?

We have a Epson S80600 with Onyx as our RIP. We utilize Illustrator for most all work. So, when we load in RGB/CMYK counterpart colors to try and match the Pantone color codes, when we go to print, everything seemed to look fine. So we took our printed test color panels and matched them up...

Lets say you are going to be printing where the software has to correct the colors for you as there is no rip software. Can you use multiple color profiles per design and i guess just save or expert each color profile separately to print? Also what woould be a good way to keep them separated...

Good afternoon, we've been having problems while cleaning the heads of our Epson S40600, the problem is that the nozzle check doesn't appear complete, we have some holes on the proofs. I attached a picture of it. Is there any recommendations we may try to fix this problem?