• I want to thank all the members that have upgraded your accounts. I truly appreciate your support of the site monetarily. Supporting the site keeps this site up and running as a lot of work daily goes on behind the scenes. Click to Support Signs101 ...

#error

  1.

    printhead misfiring/Metal threads poking out from behind rear carriage rod || HP latex 110

    Hello, We have had an issue with our HP latex 110 for a while now, but it has been constrained to just the far left of the printing zone so we have not worried about it. Recently it has started appearing all across the printing zone however. I have tried replacing printheads and ink repeatedly...
    • IceTrikes
    • Thread
    • #error #hardware #hp #hplatex #hplatex110 #misfiring #trailing cable
    • Replies: 1
    • Forum: HP Latex Printer
  2.

    Printing Issues Solved Roland XR640

    I want to give a big shout out to Jim Hancock, man where do I begin? Last year around Christmas I had a bad printing jam on my roland xr640, called for a technician at Montroy Signs Supply. Tech came by and replaced the print head. Not even a month later I noticed one print wasn’t red instead...
    • Alma1118
    • Thread
    • #error #printheadproblems #printingissues #rolandhelp #rolandissues #rolandtechnician #rolandxr640 #sacramentoca #smallbusinessowner #versaworks
    • Replies: 0
    • Forum: Member Shout Out

  3. Mutoh 1614 - EO74Err CR2 Current (HELP)

    I started having issue 2 days ago with the carriage almost finishes print and stops on left side then throws the code. I have cleaned the T-Fence/encoder strip. I tried to run another print - same thing. Double checked everything over tried running another print which it only printed the...
    • Woodsey3
    • Thread
    • #1614 #error #help #mutoh
    • Replies: 3
    • Forum: Mutoh
  4.

    Need Help HP Scitex FB750 UV Lamp Error, Cannot print

    Hello, when I try to print something, I get an error for the UV Lamps, but this error does not show up with an error message. On the home screen, it just says "Error" on the right side. The lamps are at about 650 hours and I am waiting for new bulbs to be mailed to me. Potentially related...

  5. PLEASE HELP SYSTEM HALT (1) 1e4: PCB STA4-1

    This Appeared on our UJF 6042MkII and can't find any info on what is going on.
  6.

    HP Latex 570 - 61:09 Error (Unexpected end of job. Cancelling current job.)

    Hi all, Recently I've been getting a 61:09 (Unexpected end of job. Cancelling current job) error pop up sporadically on our HP Latex 570. It normally happens towards the end of a long print (2/3 metres+) and by sods law it normally happens when printing on our most expensive material. We use...

  7. Need Help Mimaki cjv30-130 "Y-Overcurrent"

    Hello All, I have an issue with a Mimaki cjv30-130 where when printing single direction the Print Head Slams to the right and throws the "Y-Over Current" Error message. It does NOT do this while printing in Dual/Bi-Direction mode..... This would be fine IF I was not also having Scan (Side to...

  8. Need Help UJF-6042 <Remote> changes to <Local> when printing from computer

    Hi, When printing a job remotely the machine brings the carriage forward to print, but then the machine stops and the display changes to <Local> and <Data Remain>. What does this mean? Are there any settings that we can change to fix this error? Is there a diagnostic program available to run...
Top