fuji acuity

I have been having on and off trouble getting the printer to heat up lately. Besides the room was very cold as it is every winter, I was getting strange temperature readings. So I got a service key and lo and behold, the head that was set as the preferred head for temperature reading was...

Hi, I bought a Fuji Acuity LED 1600 about 2 years ago and I always had this error with HD HEATER... it comes for a brief moment with an error sound and disappears quickly from the screen so I couldn't have the chance to make a photo of it. After the error sound, I can hear a clicking noise...

Mimaki ink chip resetter/ programmer. Supports Mimaki models and ink types as follows: JV3(SS1), JV3(SS2), JV5(HS), JV33(SS21), JV33(BS2), SB51(MBIS) Mimaki Bulk Ink Systems, SB52(MBIS) Mimaki Bulk Ink Systems, JV33, CJV30 (ES3), LH100(UJF), LF200(UJV/JFX), JF/JFX Plus(UV), (BS3) // NYU...

Hello All - We just upgraded our Acuity to a new Acuity X2 (double bed) and it should be installed in February or March. We have been considering adding the roll to roll media option (because where can you get a 84" wide roll to roll printer for under $30,000.00?), and it would act as our...

For Sale: 3 brand new bags of Fujifilm UviJet KI 2 liter Ink Bags for Fujifilm Acuity UV Printers. Will sell as a lot or separate. 1) UviJet KI004 BLACK 2 LTR EXPIRE DATE: JULY-11, 2017 1- 2 Liter Bag of Black Available 2) UviJet KI215 CYAN 2 LTR EXPIRE DATE: AUGUST-11, 2017...

Hello, Does anyone know of a way that you can clean old print heads after they've been replaced and the old ones have been sitting out for a bit? we got all new print heads and now the old ones have dried but id like to try and salvage them. Any suggestions ? or know of anyone who does this ...

Hey Everybody! We've started doing more direct printing in our shop on a Fuji Acuity with KI inks (we upgraded from KO inks to try and solve issues with dark ink coverage chipping out on Foam Board - lets say 300% plus). We use a knife system with a drag knife to finish cutting out foam board...

We have problems on color reproduction while printing on canvas with the acuity.. The monitor shows a real dark blue color ..but when printed on canvas the color is purple.. what could be the problem guys??

hello all, We have just bought the acuity advance select. We are printing on wooden veneer sheets. The print quality is good but the only problem is that the wooden veneer gets bent after the printing is done. Need few suggestions to avoid the bend.

Hello sign101 community, all you guys are doing great job help solving issues sign industry and new commers are facing. we are inprocess of buying new fuji x2 flatbed printer with white ink option. I m not very familer with rip software ( onyx x10 or wasatch ). so please help me choose which rip...