head alignment

Hi Guys, I have had a few problems with my SP540V over the last few days beginning with a supposed linear encoder error (0110), leading to a scan motor error (both 0040 & 0080), then onward.... I've finally come to a stage where the printer prints, but as you'll see by the attached photo, the...

We have a Q500 CET Flatbed and we've noticed that the printheads, specifically cyan, seem to be out of alignment. Prints are coming out a little fuzzy around the edges and it seems like the colors are not printing directly over top of each other. I've looked up videos to help me figure out how...

I replaced both heads in our JFX200-2513 printer. I have replaced several heads in the past with no issues. After replacing the heads, I filled up the heads and sub tanks. I did an air purge. I went through and did all of the print adjust alignments, 300, 600, 1200. BI, SI, RE. I checked the...

Hello What adjustment i need to do ?(bias) Se picture (Attached Files) Thanks

Good afternoon! One color on my CP has really bad deflected nozzles. I was quoted around $4000 for a new one (Canadian), So I figured before I fork out the money for that, I'd try to clean the nozzles myself. I purchased a Sonic cleaner, And plan on trying to sonic clean the heads (Some have...

I purchased a used jv33-160 recently and have not been real happy with the printing results so far. As far as I can tell I am having trouble getting the head aligned properly. Is there any detailed head alignment procedures available. Is the maintenance manual the best manual to use for this? I...

Had some dropout issues, was finally able to resolve with soaking the heads and cleaning, but now on the test print, some of the lines are out of alignment on black & cyan, resulting in some slight, white spots on prints. Already performed the bi-directional adjustment, but I'm assuming it's...