• I want to thank all the members that have upgraded your accounts. I truly appreciate your support of the site monetarily. Supporting the site keeps this site up and running as a lot of work daily goes on behind the scenes. Click to Support Signs101 ...

head deflection

  1.

    Mimaki ink misting/overspray

    Hi everyone, We have started to get an ink mist/overspray on our megenta/cyan channel on our cjv150. The machine is nearly 3 years old and is on the original head. It recently had a new pump and captop fitted as well as a wiper. It has not had any dampers yet at all. Upon inspection of the...
    • Mathew Atkin
    • Thread
    • #mimaki #cjv30 #overspray #mist #ghosting #magenta head deflection mimaki cjv150
    • Replies: 0
    • Forum: Mimaki
  2.

    Mimaki Deflected Cyan Nozzles CJV150

    Hi I have noticed the cyan nozzles have become slightly deflected and I am wondering if this is something I should be concerned about? The machine is 2 years old and has had the following work on it done Cap Top Replaced 6 Months Ago Wiper 2 weeks ago Pump still on Original never replaced...
    • Mathew Atkin
    • Thread
    • cjv150 deflections head deflection mimaki mimaki cjv 150 nozzle check nozzle missing nozzle problem
    • Replies: 7
    • Forum: Mimaki
  3.

    Need Help Roland dx4 Printhead Flush HELP!

    I have a Roland SJ-540 and I purchased a DX4 printhead cleaning tool to try and recover my printhead. I have tried almost everything else first. Head soaks, damper replacement, cap top replacement, cartridge flush, deep cleaning cycles. I know I will have to eventually purchase new heads, but...
  4.

    Mimaki jv33 printing issue

    I recently purchased a mimaki jv33 that does have some missing nozzles. My question is concerning what appears to be overspray or deflection in my prints. I wondered if anyone here can perhaps help. I’m posting my settings in flexi along with a picture of my print if I can
  5.

    Print head deflection - fixable?

    Hi all, I have inherited a UJV160 which I mainly use for Corflute signs and it does a reasonable job. Except when printing red and red mix colours. Then I get noticeable banding in the print image. I assume this is due to the red head given the test print looks like this: How would this...
Top