• I want to thank all the members that have upgraded your accounts. I truly appreciate your support of the site monetarily. Supporting the site keeps this site up and running as a lot of work daily goes on behind the scenes. Click to Support Signs101 ...

hp latex 360

  1. HP latex printer 360 stuck in 01.2:10 error. Help Please!

    There was a M broken bag in L360 before Xmas and ink leaking from printhead rubber Nozzle area. The printer powered off while waiting for the new parts. The 2x power cables were disconnected. I replaced the new 2x ISS board and PIP and nozzle today then powered it on, but received error...
  2. For Sale HP Latex 360

    HP Latex 360 in very nice condition. Runs great with no issues. Looking for $8,500. Located in SW Michigan.
  3. HP Latex 360 Printer Ink Error Code :26.01:10

    Hi, The printer shows error code 26.01:10, Ink leakage detected in Magenta supply and the ink is into the air tube. the magenta ink cartridge looks ok. That magenta PIP must fail. I have a spare L360, so I can switch some parts. I have some questions: 1 . Can the PIP be recovered or repaired...
  4. HP360 Latex Broken Bag bringt mich um den Verstand

    Hallo Liebe Gemeinde. Habe ein Problem mit meinem Drucker. Habe die OP Patrone gewechselt und danach den Fehler bekommen 26.05:10 Patrone leckt. Zum Glück schon die Ersatzpatrone bestellt gehabt. Patrone raus neue rein. Fehler 26.05:10 kam wieder Im Diagnose Menü versucht über 3.3.2 zu...
  5. Streaking latex 360

    I've been having streaking today with a specific modified profile, I changed my magenta ink today as well and had some issues with other profiles too but it went away after head alignment/cleaning. I ran a color calibration, a drop test and cleaning and am still getting streaking. This profile...
  6. HP L360 Latex printer - FREE S&H - includes supplies **LOW METER**

    HP L360 Latex printer - FREE S&H - includes supplies **LOW METER** meter 150k sq. Ft. Works perfect, no issues, plug and play. RIP license not included. Currently using Onyx RIP $4500 delivered.
  7. Weird staggered print on HP 360

    Anyone ever seen this issue on an HP 360. For that matter it may be a Flexi problem (presently using the cloud verson). see the attached print. (this happens to be on perf). Seems to be happening randomly near the end of prints. This last one happened three time in a row on the same file.
  8. which is cheaper to run? UCJV300 or HP Latex 3xx

    Hi all, I know they are completely different. Wondering if anyone own both? Really want to know which one cost more to operate and maintain especially pass the warranty period? I'm a bit scare of mimaki, I heard operational and maintenance cost is quite high. I also heard that you need to get...
  9. Question Color Calibration Cancelled Due to Scanning Problems - HP Latex 360 - 70/30 Perforated Vinyl

    I keep trying to color calibrate my 70/30 one way vision perforated vinyl. It prints the scanning pattern and once it finishes drying, it begins to scan. Soon after it just give me an error message "color calibration cancelled due to scanning problems" (pictures attached). Why is this...
  10. Need Help Print Profile for AD V-4000

    So I've got a job that requires me to print on Avery Dennison V-4000 Reflective Film but I can't find a good profile for it anywhere. I have an HP Latex 360 and have never printed on this material before. The profile that I would need, and that Avery Dennisons website has, is faulty and will not...
  11. Suggestions Aftermarket Ink for HP Latex 360

    I installed Bordeaux 831 inks in my HP Latex 360 and the typical error message came up about using non-OEM supplies, but when I went to push "OK" to move on to print, the error message wouldn't clear. The "OK" button wouldn't work. I had to click cancel to clear message and another error...
  12. Need Help HP Latex 360 and 260 EMPTY INK CARTRIDGES (RECYCLE)

    Is there a place I can sell empty ink cartridges or recycle? I have HP Latex 360; 260; HP z6100; Canon iPF8400s and OKI C931e toners.
  13. Latex 360 Diagnostic

    Hey Team, I have a diagnostic download from my 360 and need a way to read it to see when the service kits were or were not done. Can anyone supply or point me to the correct piece of software, I cant boot my 360 to a point to be able to use the EWS unless someone knows a way to force it to...
  14. Need Help Substrate suggestion for Vista inserts

    We use Vista sign system a lot. A university customer is having issues with the inserts wrinkling under the lenses after a month or two, presumably due to humidity. We are using HP Photo Professional paper, 9 mil, printing on a 360 HP latex printer. Any suggestions for a substrate that doesn't...
  15. Question Die cut stickers! What media is best for an HP Latex 360 or Canon iPF 8400s

    I see all these companies coming out with die-cut stickers and decals, like sticker app, Vinyl Bandits, Rockin' Stickers, etc. What material are they using? Maybe something that doesn't have curl. The media I have tends to curl on the edges after a while. I have an HP Latex 360 and a Canon...
  16. Need Help HP Latex 360 - Onyx 12 - Can't import OML file - TOO MANY MEDIA MODES ARE AVAILABLE...

    I use to be able to import OML files into Onyx and once that was done, my HP Latex 360 printer would upload it onto the printer automatically. But yesterday I started getting a message pop up saying... These are the instructions I follow for OML files. I can no longer reach to step 4. Onyx...
  17. Need Help Can't pass connectivity test. Printer CAN access the internet, but can't verify time/date!

    It's so odd. I pass everything in the connectivity test, except verifying the time/date. Any suggestions why? FYI, I do have a VERY old firmware. Not sure if this is an issue. Don't ask me to update the firmware. I can't jump from a very old firmware to the most current. Anyway here is...
  18. Need Help HP Latex 360 prints have wet spots! Help! Always in same area. Not drying

    All of a sudden, I started getting wet spots on my prints. Doesn't matter what material I use. It looks like it's always in the same area...towards the right of the printer (if you're looking at printer). See picture.
  19. Need Help Onyx Postershop 18 RIP rendering ripping slow

    I noticed when I sent jobs to print on my Onyx 12 it ripped within seconds. It would automatically start printing. It was awesome. But now that I upgraded to 18, the ripping/rendering time is long. Why is this? I'm printing on a HP Latex 360
  20. Need Help Printing on HP Latex 360 using One Way Vision perforated vinyl

    I keep getting these streaks every time I print on perforated vinyl. No matter what profile I use I just seems like it gets worse. See pictures.
Top