hp latex

Hi Guys, Hope you can help please. Was printing some light beige, neutral coloured patterns over the weekend. usually, a nice warm, beige/brown colour. Nice neutral tones. Now..... the prints look green toned. All heads are ok, the plot test is fine, no breaks in the lines, all fields populated...

Hello, I posted about this issue a few weeks ago and still haven't solved it, but it has actually gotten worse over time and I have a better picture here to show it. You can see in this image that above the "P" the print becomes grainy and the colors start separating, then the print becomes...

Hey guys i have an hp latex 630w and its printing everything with a pink cast. I have done multiple printhead alignments and replaced it but it will not come back in. any tips?

I am getting alot of horizontal banding issues. I replaced all print heads and the issue cleared up but only for one day the next morning the issue is back. I can pull the head and give a few good wipes and it clears up pretty good but not like I think it should be. Attached is a droplet check...

I am getting a ton of horizontal banding on the R2000 Plus Nozzle check looks perfect Replaced Impelling encoder strip (no change) but looking for the location or service procedure to check or replace K0Q45-67066 Drive Roller Encoder assy Any Help would be great.Thanks

Our shop is looking to upgrade our Oce Arizona 480 and I'm debating between the HP Latex R1000 vs Vanguard vk300d. We are not a production shop. We care about being able to hit Pantone colors as best as possible and no banding. Does anyone have experience with both of these machines?

Hi Guys, Hope you can help please. We run the same media on all of our HP Latex printers ( canvas media ) On one of our machines, we have had black vein like marks traversing vertically through the prints, in an uneven fashion. Like a squggly vertical vein. I have attached a couple of...

Good morning everyone. My boss is prompting me to reach out for advice concerning some issues we are having with alignment on a 35' tall stairwell mural. We are printing on IJ180cv3 with 8520 laminate on an HP700W Latex printer. Using the base 3M 40C profile with 194 degrees temp. Vinyl is...

Does anyone know where I can find this part cheaper than HP can offer? Or does anyone have an extra one they would like to sell? It is the valve for the bars that hold the media on a HP Latex 1500

Mid print my Latex 110 ran out of Light Cyan. I changed in a new LC cartridge and now the color shifting is as if LC is not being used anymore. it's really bad looking. Added a second new LC cartridge and still doing this. Anyone with experience have any suggestions? This text is supposed to be...

Join Us for Our Open House & BBQ Event! CLICK FOR GRS OPEN HOUSE DETAILS Location: GRS, 105 W. Dewey Ave, Building C, Suite 18, Wharton, NJ 07885 Dates: Friday, May 31st | 9:00 AM - 4:00 PM Saturday, June 1st | 10:00 AM - 3:00 PM RSVP by May 24th Join Us for Our Open House & BBQ Event...

We are running econoview 70/30 Perf (vision print) on our HP Latex R-1000. For the life of me i can not get the vinyl to stop curling up BAD on the edges as it comes out. Bad enough that when i stop and it returns the vinyl back to the starting spot it is curled up enough to trip the head crash...

Debating to buy a used HP latex 570 from a neighbor. I don't have much experience with this printer. Any thoughts on it? (Currently have HP latex 365 and 115)

Hi Guys Trying to get my head around colour / profiling, etc I should know more, with 5x Latex machines, but it used to go on around me, as opposed to with me, historically. Linearise / Calibrate Is this independent of the media / ICC ? When you calibrate or linearize a Printer, is this just...

Hi Guys, Hope you can help or offer some advice please A couple of times today, and once during the week, we had the print almost swerve off its path Our prints have an equal gutter on each side of the print The roll remains straight, it is not unwound uneven, but for some reason the print...

Hi friends! I'm purchasing a used HP latex 360 and he says he doesn't know the year model, is there a way of looking that up?

Hi! I have my HP latex 115 print and cut equipment hooked up to my computer and flexi. I am purchasing another print and cut combo, can I use it with the same flexi program and computer? Any issues that can occur?

Hi everyone ! from the webpage is reported that my L26500 has reached 81% of Service maintenance kit #3. Searching on Google i've found that Service Maintenance kit #3 includes: Drop detector, ink funnel, roller transmission, ink maintenance kit and lubrication felts Line SensoR I can get all...

Hey all, We have for sale 2 working HP570s, both 2019 models, along with these we will throw in a 2017 570 as well, this machine runs but does want a service pack so it can be easily brought back to good order or used for a backup/parts machine. Will include all accessories that came with...

Hi, The gear has fallen off my spindle, the screws are inside the pole. Someone told me to take the silver "pin" out to take it apart but the "pin" is threaded like a screw and has no screw head it's just hallow. Any ideas on how to fix it?