letters

What are your thoughts on my job setup? We have done these in the past but for smaller letters and wanted some opinions or options of what yall have done. JOB 1 6mm Aluminum Composite CNC Cut Letters with Maroon Cast Vinyl Overlay Total Size 420" x 103" 48" x 45" "Logo" 335" x 47" "BETAFENCE"...

Hello, Thanks in advance for any suggestions you may have. This will be my first time installing molded plastic lettering on an office building. i have a few questions. 1). The building exterior surface is covered with stucco but I am unsure of what the core is made from and therefore not sure...

Good morning everyone, Just recently, I've developed a problem with my Versacamm SP 300i. Any san serif or fonts with straight edges cut sloppily when small in size on my printer. I do not seem to have the same problem when the design is about 10" or larger. The machine used to cut small...

Hi Everyone, I have to glue 320ea, 10" high, 19mm thick PVC letters to a 13mm PVC backer. I would normally use 2-sided foam tape but I'm looking for a more efficient option. Would you recommend using a spray adhesive such as 3M 77 Multi-Purpose Spray Adhesive or 3M 90 Hi-Strength Spray...

Hello all, this is my first post and I thank you in advance for any advice you can offer. I've been given the responsibility of running our CNC router due to the previous person leaving the company. My question is, what is the typical amount of relief to take off of channel letter backs to...

Hello, I have looked around and didn't find anything, so forgive if it has been mentioned before. We are painting some smaller (8-10"H x .75" material) HDU letters with an HVLP setup and are having a hard time keeping them in place while also keeping them elevated to dry. Being so light...

Hi all, I'm looking for something as similar as possible to the tracks in the picture. What happens as you can see, they just use cardboard, or thick paper, and not the typical plastic letters, so I don't want something super thick and stiff like the regular tracks. Appreciate any ideas or...

I have to cut some 2.5" letters out of 12mm PVC. Not a big deal but painting them afterwards is a pain. I always play with the idea of just putting viny/paint on the face and leaving the edge black or white, but I never do it. I did some searching around today and it seems like all the big...

I have never seen this font before and yet 2 different jobs and they both use this font so it must be available. Attached is the perfect set of letters I traced yesterday and I have another order using this so I would like to know what it is

I have a customer that would like white reflective letters on a blue/green non-reflective background. This will be for both 2ft x 4ft signs (planning on MDO substrate) and 18in x 24in yard-type signs (substrate TBD, probably alumalite?). Trick is they will be up for 4 weeks a year but they would...

We've used and still use Gemini Signs for a lot of cast metal letters, plastic letters etc. They have access to some materials I've never seen from another vendor like brushed aluminum laminated to an acrylic substrate or foam substrate like Ultraboard. They also have a huge amount of metal...

Looking for an installer for a set of channel letters in Ft. Walton Beach Fl. The scope of the job includes replacing 10" stainless reverse channel letters with aluminum letters.

Hello I am in Southern Spain I would like to know a good material to make 3D letters of 30mm plus thickness, suitable to be painted and for indoor/outdoor use. I think someone suggested foamex, but I thought that was just indoor. I also thought of dense polystyrene but that seems a lot more...

what is the font used for the Wagner Zip-Change marquee letters, specifically the MODERN STYLE?

What font is used in this state seal? Also, I'm tasked with making dimensional letters for one of our state senators office and he wants the same font in the seal. I'm afraid the stroke width of these particular letters is going to make it difficult, so can you recommend a font family that looks...

I can not seem to find any threads directly about removing hdu letters so I will ask for your help. I have a sign face made of 2" thick HDU. Attached to it are 1" HDU letters. I did not make the original sign, but we have been asked to reconfigure/remove some parts of the sign and put it on a...

Axiom with Nichia of Japan LED's and NC LED with Samsung LED's, both NOT made in China! http://www.thesignsyndicate.com/forums/index.php?/store/category/22-led-power-supplies/

Rusty look sign

Store Logo Sign

Sun Wall Decor Sign