mimaki cjv30-130

I'd like to know two things please: 1. Can you use SS21 orange ink on the Mimaki CJV30? 2. Everyone may remember that the Roland orange ink on the RF640 eight color machine would fade noticeably within 3 months. Anyone know about the permanence of the SS21 orange ink?

Hi All! We recently purchased a CJV30 back before Christmas. We have a Intermidate problem that has now become a permanent problem with the mark detection on the printer. We send all print and cut files from Cored Draw via RasterLink 5G. The printer is set to find the first mark with no...

Hello, First time posting so hope all is correct. I am looking for a printer tech that is familiar with Mimaki printers in the Kentucky area. I have a CJV30-130 that I have owned for about 6 years now. Everything was going fine then I got hit with a bunch of signs and banners for all the seniors...

Printer will not be used a for a few weeks so I just want to confirm some steps so there will be less issues when going back into use. 1. Perform a Custody Wash. 2. Ensure cleaning cartidge is not empty. 3. Leave plugged into to do Pump Tube wash. (Right now it is set for 48 hours, is that too...

I have 8 Mimaki SS21 ink cartridges in my CJV30-130 printer right now. 4 are full & 4 are just about empty. Will I be able to replace the 4 empty cartridges with CAL-ECOCART-MIMAKAI440-A. Will this work with 4 original Mimaki SS21 cartridges & 4 CAL-ECOCART cartridges or do I need to have all 8...

I have a Mimaki cjv130 that uses fine cut 8 for it's cut program. What it's doing is not detecting the 3rd registation mark. Everytime it gets to the back left mark it beeps and sends the laser back to the start point. I think it might be a setting error, maybe I selected or de-selected...

So we have a mimaki cjv30-130. I have 10,000 stickers in smaller sections with registration marks already printed out and ready to be cut. The printer/cutter was doing okay and reading the marks and cutting away. Then, without anything changing in my routine of cutting process this morning, it...

We're a creative design company fresh off the ground. We recently purchased a brand new Mimaki CJV30-160 and Gfp 563TH laminator. We spent a great deal of time reading and researching in order to make our final decision and we feel really good to have found this online community. We look forward...

HI all I was searching for a roller pressure issue with my Mimaki CJV 30-130 and I found Signs 101 was really helpful. I'm new to the wide format printing world, and any advice on the best materials or helpful hints will be greatly appreciated. Cheers Roger:Australia

Just signed up yesterday and already hoping for some help; we have a new (Nov 09) CJV30-130 that we are still getting our feet wet on. It's been performing well for us for the most part and up until now and issues we've had we've been able to remedy ourselves. Today while running some test...