I want to thank all the members that have upgraded your accounts. I truly appreciate your support of the site monetarily. Supporting the site keeps this site up and running as a lot of work daily goes on behind the scenes.
Click to Support Signs101 ...
Hello
Hopefully someone can help me. I bought a Sp-300v from ebay that sat in a wearhouse for a year. I preformed a 48 headsoak on the printhead which were completely clogged and got the solvent fluid to run freely through the head.
Now when i try to test print the printer goes through the...
Hello there.
I have a Mimaki JV3-160 for a while now, everything worked perfectly until today when I wanted to print something and nothing is printed, not even a nozzle test.
There is no errors on the display, nothing. If I want to print something, the printer will start print but no ink will...
About 6 months ago the printer was working okay. I bought it used and the previous owner told me the heads would need to be replaced soon but it should be fine for the things I do because I would not be using it as much as they did.
I did a couple of prints and then it sat for a while. During...
Good Afternoon Everyone,
I was hoping someone could give me some ideas on what to try with my Roland VP 540i. My yellow & magenta are not printing, also not coming through the cap tops or tubes. I have done several cleans with no luck. Last week all colors were coming through except yellow and...
Hi - I have a mimaki CJV30-100,
Basically I was losing print on Cyan and Light Cyan, so attempted to clean it with the syringe, cleaning fluid whilst in the machine - I know stupid rush job. Basically the pipe popped off and some fluid went in the ribbon cable, and it had a little smoke /...
Hi Everyone,
I am having trouble with a Mutoh RockHopper38!
I previously saw the printer work around 2months ago once purchasing but when installing it at my house I came across multiple issues with the printer.
STATUS:
Printer turns on and boots up correctly.
Inks are installed and have a...
My printer has been out for about 3 weeks now, at first I thought it was the pump cause it was not pulling ink.
I replaced the pump, and it started pulling ink. Now its just not printing at all. I did the empty mode and filled the ink in again.
Now it seems ink is stopping before it goes through...
Greetings All,
My shop bought a Mimaki JV3 - 130SPII used and got it up and running- well it acts like its running, but no ink is coming out. No errors, but no ink. After inspecting the lines, they seem pretty translucent. We called Mimaki and registered but they wont get back to us for...
:help:brittain:
HI EVERYONE, I'M LOOKING FOR SOME HELP WITH MY MUTOH RJ-6000,
THE PRINTER HAS BEEN WORKING FINE FOR A FEW DAYS, I CAME TO USE IT ON FRIDAY, AND IM NOT GETTING ANY BLACK OUT, THE DAMPER SEEMS NOT TO BE GETTING ANY INK INTO IT, THERE IS PLENTY OF INK IN THE INK SUPPLY, I HAVE...
Well, here it is,
Started printing a banner, then a minute into it, I lifted the shield to
Stop the print to make sure the head position lever was in the up position.
When I did so I accidentally moved the print head carriage a inch or two.
I immediately lost all color except a faint blue...
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.