oce

Hello, we have a ecosolvent printer Oce CS 9160 and we are thinking of buying a new printhead. The problem is that when I looked online for a oce CS9160 printhead, I can't find one ! When the machine starts, it says MUTOH Valuejet 1614, so I suppose the head is DX5 (at least it looks like). I...

We have been researching flatbed printers and have narrowed the search down to the Mimaki JFX200-2513, Oce Arizona 365 GT and the Jetrix KX5. We produce graphics for hospitals, universities, corporate interiors, museums and trade show exhibits. High quality resolution and ink adhesion are...

I been having lot of issues with my Oce Arizon 350GT since last week. If anyone know what the INK HEATER SYSTEM PROBLEM means please reply. The ink temp say N/A, and when I try to heat it just says INK HEATER SYSTEM PROBLEM, what is that related to the motors?? Thank You

Hey Guys, We have an Arizona 480GT with IJC258 ink set. While printing using the roll function, we are having some major issues with banding. Seems to be way better and not very noticeable when printing the same image on the flatbed. Head tests are all perfect before and after I stop the print...

Hello Guys, So we have had our Arizona 480XT for a little over a year and a half now. This printer has been nothing but problems and nigtmares. We were told by Oce to use the IJC-256 ink set, which is more geared towards outdoor signage; in terms of adhesion and such. I recently found out that...

Hi group I hope I dont break any rules on my first post, by asking for a distributor. I am based in México city, México, and bought an Océ Arizona 318 machine, wich was installed the fist week of January, and has been idle most of the time, first because Oce did not have inks in stock, and now...

Hi All, Wondering if any one out there has experienced the following error "INK HEAT SYSTEM PROBLEM" on their OCE UV Flatbed? If so, any details on what causes it and what the fix is? Thanks

I went to SGIA, have been to HP's Latex and Flatbed Academy and have read everything I could find for the last 2 months. I vend foamboard, pvc, vinyl banners from local and Internet sources. I am now prepared to invest $150k to outfit an entire shop and have adequate working capital. Flatbed...

We are in the market to purchase a new or used Flatbed. We print primarily on rigid substrates and do a lot of Double Sided printing (Real Estate Panels). We are currently using a Roland VP300 and a Graphtec 48" cutter and they have been doing a great job for the past 3 years. We are...

Hello All, We're having intermittent trouble with streaking and handprints on our OCE board prints. The sheets must be cleaned before printing, and we most often have great results. Sometimes, we get a big streak through a print, or some other mark which comes from the cleaning. We've...

Hello, Was wondering if anyone on here runs one of these models?? We are going to go to Vancouver in a few weeks to look at there facilty and demo them but was just curious what people thought of them... I know they aren't the fastest out there but a turtle moves faster than the FB i have...