I want to thank all the members that have upgraded your accounts. I truly appreciate your support of the site monetarily. Supporting the site keeps this site up and running as a lot of work daily goes on behind the scenes.
Click to Support Signs101 ...
Hello friends . to start our little printing activities we started our roland sp 540v. we have just changed the printheads. however we are unable to make the bi-directional settings, in fact each print test is totally different and inconsistent without even changing the parameters. is it an...
Hi, Recently we picked up a Mimaki CJV150 cheap as it had been sat unused for a few years. We are hoping to get it up and running without the need of a tech. I have a few questions which I would appreciate help on.
The machine had been left on however the ink had expired and the cap top was...
Hello,
This is my first post here! Thanks to everyone for all the helpful information I've found.
Ghosting
I recently did a head replacement on a VP-540 (it was the black head), and after the replacement, there was some 'ghosting' (that's the only word I can think of that makes sense).
I'll...
Hi Guys I have been having endless issues with my xc-540 this week firstly I kept getting sheet set error finally after a few days changing different things I changed the sensor and it worked fine however my issue is now I am not getting and Magenta or Cyan after multiple cleans etc nothing...
I have a weird issue with the yellow head on my Telios direct disperse printer. It's a Roland body (SJ-1000 I believe) that's got a fixation unit attached to the front. My yellow print appears to overprint a bit to the left. I thought at first that maybe it was just a few clogged jets that were...
I bought a used Roland Versacamm SP-300i a few months ago and it has been working great. We recently moved to a new location and I had a ton of issues getting it set back up. It was popping errors for the limit initialization and after much research and head scratching I figured out how to reset...
Print head test:
Pressing the test print button on the machine:
Our colour test sent from rip (Roland ColorChoice)
You can see on the black that the yellow is creating a halo effect. I was just wondering why it was doing this.
And I was also wondering why the colours are more vibrant...
Hi!
Im completly new in LFP, after preparing a used JV33-260 (new printinghead, new ink), I run into troubles after adjusting the head.
Printing with RasterLink is working, but printing in bidirectonal mode causes ghosting - a difference between the two ways about one millimeter. (see...
print head out of alignment
my prints are very fuzzy. it looks like i am getting the same results every time i print. the bands (when i turn print color bands) are overlapping when i do each print. no matter how many times i do printADJUST. they don't clear up. can you give me any advice as...
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.