printing problems

Hello everyone, Anybody else ever had this problem. No matter what we do we cannot FILL the reservoir. Therefore we can´t print anymore Any hints would be appreaciated greatly

Hi everyone, We've been running the Mutoh's through FlexiSign Pro for years. While each ValueJet prints color slightly differently (even when using the same profiles), they handle color pretty consistently. We have recently added a Roland and would prefer to continue printing and cutting...

Have a problem with some black ink miss fire. We have soaked and soaked the head and cleanings. When we run a nozzle check, the second set of bars for black are missing about 70%. We replaced the black dampers, but did notice that the new damper for one of the blacks didn't fill all the way up...

My HP L26500 (new in 2013) prints a wavy pattern on the front 12-24" or so of each print. The pattern has way less ink in the wavy area, it looks washed out. I only notice this on 13oz banner material. I know it's not the temp because sometimes it prints fine. I am not sure why it would do this...

So I have been using my Mutoh VJ1624 for about a month now, and am having a problem on long run printing. I am trying to use this for car wraps and long banners over 10ft in length. The problem is at about 6-8 ft of printing I start to get bunching media in between the rollers causing the...

We recently purchased a used Mutoh Falcon Outdoor 62.:banghead: I seem to be having problems with pumping ink through the machine. the Machine was sitting for god knows how long, yet the previous owner did do a Flush before letting it sit. Taking it apart I noticed that the capping station...

I am having a problem with my SP540. When performing a test print the black does not print properly at all. I have tried all cleaning methods including soaking the head for serveral hours by filling the capping stations with cleaning fluid. I have included a picture of my test print. The...