roland

just wondered if anyone had ever risked it and if so how did it hold up?

When the lever is pressed down to engage the rollers, the end rollers slide freely side to side and only the middle rollers work. Does anyone know of an adjustment or easy fix for this problem.

Hi all, My tech is on vacation and I'm trying to get my Cyan to print properly. Just replaced all cap tops and dampers on the unit. It had been printing well for the last week and then yesterday decided blue would work only on half the print head. I did a deep soak yesterday and checked the...

Does anyone know the street fighter code to put the vg2 in service mode? I'm seeing some drippy symptoms that I remember resolving once by doing a damper flush. I had a tech on the phone who read me the button combo that time and I forgot to write it down. Thanks!

Hi all, Currently I own a Gerber Edge 2 and mainly make 20 mil football helmet decals. I plan to continue to keep football decals my main source of income in my business, but want to move on from my Gerber Edge and only use my Edge for chrome/metallic decals (mainly because I heard printing...

Hi folks, I try to help everyone on here as much as I can and I consider myself pretty knowledgeable when it comes to Roland Printers. However, now I have a bit of a dilemma myself and am hoping for those with more knowledge then I, might have some insight for me. I think I know what the issue...

VersaCamm VP-540i 54" Eco-Solvent, Wide format Plotter Printer Cutter. Our shop just purchased a new Roland and we no longer need this machine. New heads, new caps, new motherboard, new dampers. Maximum Print Area 1346mm Max Print Speed 15.5 m2/h Inkset - 4 color machine, CMYK VersaCAMM is the...

This is the first error I've got that isn't a service call, so it seems like this one should be easy to fix. The ambient temperature is room temp, so that's not the problem. Seems like a faulty thermistor or something so I'll try to locate that and check the connections. Got any ideas what the...

Sorry, I know this type of post probably gets annoying to some people, but I'm hoping one or two people will be able to guide me in the right direction. I currently have an Epson Surecolor S50675. It has been fine for the most part, but I've had my share of frustrations with it - mainly head...

I got a "Service Call 0212" error message, and after reading the manual, I got nervous. Here are the possible causes listed for this error: I got a quote for a set of new UV lamps for about $8K. Fortunately I don't think that will be necessary. I did some testing and from what I found, I think...

We are located in San Francisco/CA, we have a VG540 that still function well but we don't use it much, so we want to see if anyone interested to buy it? Or if any one know where we can sell the machines, any information, we are much appreciate :D Thank you all! This is a amazing platform! I'm...

Well I got a new (to me) Roland LEJ-640FT. It's several years old and currently "not working". This is my first post here, but I've been browsing for a little while. My goal is to get this printer up and running and post here along the way all the troubles I run into and solutions I find...

I tried a flushing position adjustment in service mode but I notice there is ink now dripping out of the left side of capping station after cleanings (picture1). So when I did the flushing position adjustment it says to press the ENTER key when the arm part of cap unit starts to move which I did...

Hi guys, as my last post said, all new to this so forgive this question if it's a simple fix My colours appear to have some kind of speckled appearance to them. I have a vp300i roland. Can anyone suggest things for me to try to see if I can correct this issue. Especially noticeable in the...

Hello everyone. I have Roland XC-540, it was working perfectly, but suddenly after a really short amount of time there appears a grinding noise behind the cutter assembly as far as i can hear it. When the head is printing, after less then a minute there appears a horrible grinding noise, and if...

For sale both Work great Open to fair offers Roland RF640 Roland XR640 Free shipping Call 203-943-5064 or text

Trying to find out which order the colors of the Test Print are in for a Roland VS-540i so I can find out which color is missing nozzles to flush with cleaning solution. Looking closely at my test print I think the Color Order is Light Black, Cyan, Magenta, Yellow, Black, Light Magenta and...

I am newer to this machine but i manage many other digital printers. I have been on this machine for a few months and i have a stack of solid test prints. We usually run this machine non-stop but have had a few months down time. When i came back to run the machine as i did before the test prints...

Hey guys! So recently I was doing some maintenance on my VP300I as one of the manifolds for the head were broken on the damper for yellow. Like a idiot, I disconnected the ribbon cables to the head while the machine was still "On" it was in sleep but it went right over my head to properly turn...

Hey all, We're seriously considering adding a medium-format UV-flatbed printer to our arsenal. We would like something that can accommodate coroplast signs that are 28"x44". This is about the largest size that we would like to print DTS in-house. We have been comparing a few different models...