• I want to thank all the members that have upgraded your accounts. I truly appreciate your support of the site monetarily. Supporting the site keeps this site up and running as a lot of work daily goes on behind the scenes. Click to Support Signs101 ...

vs640

  1. vs 640 deflected light cyan with new head - striping

    Hello again! I'm with the problem below: VS-640, new head, new captop, headrank OK, bi-DIR ok, Calibration ok, but the light cyan is unfocused as seen on testprint, It causes striping on normal pintouts. Is there any suggestions to elimanet this issue? What sould i do? Thank you for your help!

  2. Need Help Roland VS-640 Profiles for Fiery XF

    Hi Guys, First of all, please forgive my ignorance or stupidity if I'm going about this the wrong way. Background - We've had a VS-640 since brand new and have always used Versaworks. 1 year ago we brought in a Vutek GS2000LX Pro and it came with Fiery XF and a license for an additional...

  3. Need Help Can you import Roland VS-640 Profiles for Fiery XF

    Hi Guys, First of all, please forgive my ignorance or stupidity if I'm going about this the wrong way. Background - We've had a VS-640 since brand new and have always used Versaworks. 1 year ago we brought in a Vutek GS2000LX Pro and it came with Fiery XF and a license for an additional...

  4. Need Help vs 640 random slight magenta squares and forms in printouts

    Hi guys, I've a problem with my printer in any mode - when try to print huge amount of yellow patterns, it print random slight magenta forms in it. It presist just in a specified lane - about 20-22 cm from the capping station and last in about 5-7 cm. If I move the basepoint toward from the...

  5. Roland vs640 seeping ink

    Hi guys , my first post on this site, My Roland vs640 has been printing 10/10 perfect , though lately in standard setting it has been dropping blobs of blue ink onto the media clamps and the print ,Today it's worse! Blue ink dropping straight through the head even in maintenance mode, I have ...
  6.

    VS-640 - ligth cyan run out during printing - problem

    Greetings for all from Hungary!:smile: I would be very glad, If I can get some help or tip in connection with my problem. I dont know where else to go or how.... I have constatnt ligt cyan run ot problem: After cleaning it gives a 100% testprint, then print around 50 cm long then the LC become...

  7. VS640 when tiling an image the cut lines shift over

    Hi VS640 when tiling an image the cut lines shift over, but they dont shift in equal amounts, if i have 2 parts of the image on the printer say 50 cm wide x 240 long, when it has finished cutting the left hand print will be over by say 1.5 mm and the right hand print will be over by 3-4mm i...

  8. PC recommendations for Roland VS640

    Hey, We've got a new Roland VS640 arriving on Monday and I am planning to get a dedicated PC for ripping etc just for the printer. Wondering if anyone has any recommendations or particular specs they did/didn't have and wish they did on their versaworks PC? Cheers

  9. VS640, VS540 service mode protection code firmware 4.20

    Has anyone got the code to get into the service mode on the vs series of printers with firmware 4.20 . it says service mode protected. I need the key sequence to unlock service mode please.
Top