wall murals

Hi Everyone, LONG time lurker and enjoyer of this amazing community. My company primarily does wall wraps with calendared and cast films. Today a customer came in with a quote on an industrial wall covering. It was very thick, very rigid and had virtually no overlapping seams. I believe this is...

Hello new to the machine Im trying to cut 2 long pieces of wall vinyl 24" inches each on a 54" wide roll about 200" long but im having trouble as the paper is going back and forth a lot and falls off the backing and machine gets jammed. I lowered the knife pressure by a lot and and the...

Hello doing wall murals and got a roll of the avery mpi 2611 what are some recommendations for the laminates that would work well with it? Also if i go with something like fabric like Phototex or GF 234 Graphi-Tex would i still need to spray laminate on it. Printing with an epson 60600 and was...

I'm back in the sign business, but on a limited basis and more specialized after being away from it for 22 years. I currently have a J.O.B., but want to get out of that rat race. For the past 2 decades, I have been painting indoor murals off and on for the corporate client, while holding down...

Hello, My client want a banner/graphic to cover most of this exterior wall. It needs to be durable and last a long time. Perhaps something in a frame or using tension bars? I am looking for suggestions on how to do this. Suppliers etc. Thanks, Mark

Hello, I am graphic designer doing work for a church building. We have a design that we would like to cover the entire surface area of the ceiling. The Ceiling is Barrel Ceiling. I do not know much about printing but I hear too many different opinions such as: - 3M Vinyl is the best way - Do...

Our Client has bought supersize images ( 18.7MB ) size 23.38583 x 17.3228 @ 300DPI from shutterstock and want us to print wall murals for their office walls. When we blowup the images its becoming really pixalated. wall size is 270" w x 113". viewing distance will be 3 -4 ft. Is there any...

Hello, so wondering if I could get some feedback on approaches people might make on this job. In the picture you will see lots of pipes coming out of the wall. We will be installing panels of graphics from ceiling to floor, and the panels won't always line up with the pipes, so that means we...

Hello All - We have an HP L360 we are using to print on Korographics Abaco beach. We've printed two rolls of Abaco Beach and have followed the process outlined on the Korographics website (http://www.korographics.com/printing.php) to fight what Korographics refers to as "shading", meaning when...

Recent visits by outdoor and sign industry veterans resulted in their amazement. See for yourself on the video below. http://youtu.be/6YfEz0iThDI Lind 4'x16' BannerFrame Installation Visit LindSignSpring.com for more videos.

What are you using for permanent Wall murals compatible with HP Latex Inks?

We're working on a project that features a lot of wallpaper - hundreds of linear feet. This is for an interior exhibit that will be up for several years and receive a lot of traffic. Been testing the various solvent-printable wall films, and have narrowed the list down to two. At this point...

What a project! This was my first attempt at a large install and boy did we learn a lot! My students created the graphic, did the printing, laminating and the install. The only thing I did was help run the Big Squeegee for the overlam, and help with initial alignment on the panels. We printed...

Hi everyone, i just wanted to introduce my self to the forum! ABI Digital Solutions is a full service digital graphics company with an emphasis on larger graphics. I like to tell people that we are capable of producing anything that is larger than a brochure including billboards, vehicle...

We've recently found a niche in designing and applying wall murals to decorate vacant tenant spaces in some local shopping centers here in Hawaii. The reason I mention Hawaii is because the sun has caused havoc on some of the prior murals (applied by other sign companies,) and we've had to...