application tape...

[dynamicdezigns]

has anyone tried to cut a larger roll of application tape down to other sizes? i bought out a smaller company in my area and they had 3 48" r tape logs. i hardly use anything more than 24", so i would like to cut these down. any suggestions on the easiest way to do this and get a decent cut?

 

[S'N'S]

I've read where guys have used a band saw, never done it myself but would if the need arises.

 

[DizzyMarkus]

I have cut rolls down of lam, app tape and vinyl wth a Chop saw (miter). Ticket is dont let it get hot -- cut some, let cool, roll roll more :0)

Markus

ps -- the first time I held my breath hehe

 

[dynamicdezigns]

Certain type of blade? or how many teeth..

 

[DizzyMarkus]

Tooth count sorry, it is a paneling type blade and says on it plastics and wood. I have yet to try it with less (larger)teeth. Might not get hot as quick.

Markus

 

[dynamicdezigns]

Guess i will give it a shot this week. thank you

 

[Malkin]

I have done the same, just keep it cool and rotate.
Also, try to avoid leaving jagged edges, which will tear when the roll gets used.

 

[petepaz]

we have also done this with lam. we have used a saws-all w/ a metal cutting blade. i guess anything with smaller teeth so it doesn't rip the material too much
and +1 to rotate and make sure it doesn't get too hot it will melt the material on the edges and then it sticks