Question Are there any inksets or settings for the UCJV300 gloss that makes it more comparable to Roland gloss prints?

[RonnyCrack]

The attached image is from a Roland Printer, I'm wondering if there's any way to get a comparable level of "wetness" in the gloss? Or am I doomed to the weird, textured gloss forever..

I've gotten sort of close with STS inks and my UV lamps set to -40% but that's only in comparison to my own, worse prints. When I look back at an image of a Roland gloss print I'm defeated as it makes the difference my trial and error has made look marginal at best..

Do I just need to add a Roland to the mix? I've heard too many bad things to switch solely based on the gloss looking better but it's tough losing a gloss client and knowing they probably won't come back.

 

[Smoke_Jaguar]

Are you doing 600x1200DPI and setting lamp mode to gloss? Can also stack gloss layers if you want to go fancy, but probably need to execute a pull-back. Things like environment can play a slight role as well, ambient temp, humidity, airflow, etc, but that's true with any printer. Some materials also do better with thicker base (white or color) layers underneath them. Also, try using a matte profile, even if the media is gloss. Tons of variables to tweak to get that sweet-spot. As for adjusting lamps, never bothered, but could make a huge difference.

Inks are a mix of expired Mimaki I can find cheap, or fresh STS when I feel fancy. LUS-170 series

 

[RonnyCrack]

Are you doing 600x1200DPI and setting lamp mode to gloss? Can also stack gloss layers if you want to go fancy, but probably need to execute a pull-back. Things like environment can play a slight role as well, ambient temp, humidity, airflow, etc, but that's true with any printer. Some materials also do better with thicker base (white or color) layers underneath them. Also, try using a matte profile, even if the media is gloss. Tons of variables to tweak to get that sweet-spot. As for adjusting lamps, never bothered, but could make a huge difference.

Inks are a mix of expired Mimaki I can find cheap, or fresh STS when I feel fancy. LUS-170 series

600x1200, 1200x1200, set to gloss, overprints, tried with and without pullbacks. It's just like, a texture on the gloss. You can see in the above image attached of the Roland print the reflection is so clean, with hard edges. You can notice on the Mimaki gloss print below, the reflection is more feathered by the texture of the gloss. I can upload a better picture later but you can sort of see the texture on the mitten.

 

[Smoke_Jaguar]

I just see one image, so not sure what is what.

 

[RonnyCrack]

I just see one image, so not sure what is what.

Sorry, just edited my post. Let me get a better image on a thicker print as well

 

[RonnyCrack]

I just see one image, so not sure what is what.

Mimaki prints - see how the gloss is more feathered/textured compared to the original post image

 

[Smoke_Jaguar]

Check your media compensation/head gap, feathering can be indicative of ink dusting as well as ghosting.

Dumb diagram for illustration purposes.