Hi,
I had shorted slider board fry 2x transistors on the main board.
I have replaced the transistors as required, that was no issue.
Measuring all transistors they are all reading the same as each other now but TP5 still open circuit to gnd.
Try to power it up anyway with new slider boards and head unplugged - i get the smd leds on the board light up, and the display backlight come on - but nothing further, no text, no boot etc. After aprox 30 seconds board beeps a long beep.
Any ideas??
I had shorted slider board fry 2x transistors on the main board.
I have replaced the transistors as required, that was no issue.
Measuring all transistors they are all reading the same as each other now but TP5 still open circuit to gnd.
Try to power it up anyway with new slider boards and head unplugged - i get the smd leds on the board light up, and the display backlight come on - but nothing further, no text, no boot etc. After aprox 30 seconds board beeps a long beep.
Any ideas??